ARTICLES

Filter  
Active filters 0
Remove
  

Refine your searches by:

Collections
Education
Technology
Social Sciences
Biology
Architecture and Urbanism
Economy
Religion
Research
Literature
Languages
all records (74)

Languages
English
German
Portuguese
Spanish

Countries
Indonesia
Ukraine
USA
Brazil
Russia
Romania
Poland
South Africa
Turkey, Turkish Republic
Denmark
all records (75)

Years
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
all records (24)

Filter  
 
6.200  Articles
1 of 620 pages  |  10  records  |  more records»
This work aims to optimize the process parameters for improving the wall thickness distribution of the sheet superplastic forming process of AA7075 alloy. The considered factors include forming pressure p (MPa), deformation temperature T (°C), and forming... see more

Isothermal and near isothermal forging are specialized metal processing techniques which are used for producing critical aeroengine components out of advanced materials such as titanium alloys. The process can be used to produce net / near net shape compo... see more

 Improper parameter setting at the bipolar plate forming by superplastic process will outcome damage to the final workpiece. By employing computer simulation, the defect at the bipolar plate could be predicted close to the maximum thickness reduction... see more

The addition of natural fibers in concrete has effectively proved to increase the mechanical strength and durability of concrete in the recent years. They help to tackle the brittle response and limiting post-yield energy absorption by forming a bridge ac... see more

This study has established the impact of a nano-???2 P25 modifier and a nanocomposite based on titanium dioxide, doped with sulfur and carbon dioxide (???2/S,C), on the photocatalytic, mechanical properties and the structural formation of cement mortars. ... see more

The major property of super plastic material is the high strain rate sensitivity (m = 0.3), which provides high resistance to necking growth, the extension can be obtained is very high (e> 500%) without breaking. decent to obtain high m, the material r... see more

Abstrak Penelitian ini bertujuan untuk mendapatkan komposisi agregat kasar gabungan Batu Banjarmasin dan Batu Merak dengan tambahan superplasticizer yang memberikan kuat tekan optimum. Untuk mencapai tujuan tersebut dilakukan penelitian di laboratori... see more

The main difficulty encountered in the formulation of Self-Compacting Concrete (SCC) (SCC) consists in choosing the most effective cement-superplasticizer pair allowing obtaining maximum water reduction, good workability and satisfactory rheology of the c... see more

The compatibility of slag blended-cement (SBC) with superplasticisers was investigated using rheological measurements. Accordingly, continuous flow tests and thixotropic behaviors were studied  for different ages of hydration. In this work, the slag ... see more

1 of 620 pages  |  10  records  |  more records»