ARTICLES

Filter  
Active filters 0
Remove
  

Refine your searches by:

Collections
Mechanical Engineering
Technology
Computing
Physical

Languages
English

Countries
USA
Indonesia
Russia

Years
2022
2021
2020
2018
2017
2011
2010

Filter  
 
10  Articles
1 of 1 pages  |  10  records  |  more records»
Gasket metal merupakan alternatif pengganti gasket berbahan asbestos, namun gasket metal masih memiliki banyak kelemahan. Penelitian ini ditujukan untuk mencari waktu coating yang optimal agar gasket metal dapat mencegah kebocoran. Penelitian ini merupaka... see more

In this study, the response of local sharp-notched SUS304 stainless steel tubes with different notch depths of 0.2, 0.4, 0.6, 0.8 and 1.0 mm subjected to cyclic bending at different curvature-rates of 0.0035, 0.035 and 0.35 m-1s-1 were experimentally inve... see more

Gaskets are components that play a very important role in piping connections to prevent leakage. Several factors affect the performance of the gasket, one of which is the contact surface of the flange. The quality of the contact surfaces in the connection... see more

Perkembangan metode elemen hingga memberikan kemudahan bagi para peneliti untuk memprediksi proses dan hasil forming suatu produk sehingga kegagalan bisa dicegah lebih awal dan biaya karena cacat produk bisa dihindari. Pada penelitian ini, proses forming ... see more

Surface hardening pada bahan Stainless Steel 304 dengan alat RF-plasma nitrocarburizing. Surface hardening pada bahan Stainless Steel 304 dengan alat RF-plasma nitrocarburizing telah dikerjakan. Beberapa samples telah di-nitrocarburizing pada temperatur 4... see more

ABSTRAK Pengaruh Nitrocarburizing  DC-Plasma Temperatur (550-700)oC Terhadap Perubahan Kekerasan Permukaan Dan MikroStruktur Pada Bahan SUS 304 Beberapa samples telah di nitrocarburizing pada temperatur (550 – 700) 0C selama 1 jam.  Hasilnya men... see more

-

In this study, a (La0.8Sr0.2)0.98MnO3 protective layer was prepared on the C276, Crofer22 APU, SUS304, and SUS430 alloys by the atmospheric plasma spraying technique (APS). The oxidation behavior and electrical property of these metal alloys have been inv... see more

CrN and Cr-Al-Si-N coatings were deposited on SUS304 and Si-wafers by a hybrid coating system. The Cr and Al-Si target were connected to the cathode arc ion plating (AIP) and high power impulse magnetron sputtering (HiPIMS), respectively. Various Al and S... see more

1 of 1 pages  |  10  records  |  more records»