ARTICLES

Filter  
Active filters 0
Remove
  

Refine your searches by:

Collections
Mechanical Engineering
Industrial engineer
Technology
Construction engineering
Pure sciences
Civil Engineering
Economy
Infrastructure
Architecture and Urbanism
Physical
all records (69)

Languages
English
German
Spanish
Portuguese

Countries
Indonesia
USA
Ukraine
Brazil
Lithuania
Chile
Russia
Argelia
Czech Republic
Switzerland
all records (69)

Years
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
all records (24)

Filter  
 
3.959  Articles
1 of 397 pages  |  10  records  |  more records»
The inhibition efficiency (IE) of Potassium dichromate - Zn2+ system in controlling corrosion of rebar steel in Simulated Concrete Pore Solution (SCPS) prepared in well water in the absence and presence of Zn2+ has been investigated by mass loss study. It... see more

High requirements in protection of steel reinforcing bar (steel rebar) from corrosion are necessary since there are multi interaction of corrosive chemicals which cause early damage of concrete buildings. Corrosion of steel in concrete can destroy the con... see more

Knowledge of the critical chloride content in concrete required to initiate corrosion of reinforcing steel is economically beneficial for the assessment and maintenance of existing structures. Also, many building codes now specify a service life of 75 – 1... see more

This study aims at experimentally and theoretically investigating the cracking moment (Mcrc) of hybrid Fiber Reinforced Polymer (FRP)/steel Reinforced Concrete (RC) beams. Six hybrid Glass FRP (GFRP)/steel and three GFRP RC beams with various GFRP and ste... see more

THE OBJECTIVE OF THIS STUDY IS TO INVESTIGATE A HYBRID REINFORCEMENT METHOD FOR CONCRETE BEAMS, WHICH CONSISTS OF STEEL REBARS AND HDPE (HIGH-DENSITY POLYETHYLENE) UNIAXIAL GEOGRIDS, BY DEVELOPING AN EXPERIMENTALCOMPARATIVE INVESTIGATION BETWEEN UTILIZING... see more

The bond strength between rebar and concrete is important for the quality performance of reinforced concrete structures. At the interface, bond strength development mainly depends on surface configuration. Different rib configuration improves the strength... see more

Experience has shown that many aspects of experimental design for studying steel corrosion in cementitious systems may significantly influence the obtained results. In the absence of standardized methods to study steel corrosion in concrete, researchers u... see more

A series of pull-out tests were conducted to examine the bond deterioration of epoxy resins at elevated temperatures through the relationship between the critical temperature and bond stress. The steel rebars investigated were deformed bars with varying d... see more

Hot dip galvanizing technology is now widely used as a method of protection for steel rebars. The corrosion behaviors of Q235 carbon steel and hot galvanized steel in a Ca(OH)2 solution with a pH from 10 to 13 was investigated by electrode potential and p... see more

1 of 397 pages  |  10  records  |  more records»