ARTICLES

Filter  
Active filters 0
Remove
  

Refine your searches by:

Collections
Technology
Biology
Research
Education
Chemistry
Pure sciences
Agronomy and forestry
Public health
Architecture and Urbanism
Economy
all records (74)

Languages
English
Spanish
German
Portuguese

Countries
Indonesia
USA
Brazil
Ukraine
Switzerland
India
Chile
Italy
Romania
South Africa
all records (82)

Years
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
all records (24)

Filter  
 
8.922  Articles
1 of 893 pages  |  10  records  |  more records»
Laboratory tests were used to evaluate the effect on the mechanical properties of a hot asphalt mix (MDC-2 as per INVIAS, 2007 specifications) due to the addition by wet way of a residue of low density polyethylene (LDPE). The strength under monotonic loa... see more

This article shows the results of a study on the evaluation of the use of the TDI (Traffic Densification Index) for the prediction of the behavior of a conventional asphalt mixture and two nano-modified asphalt mixtures (one with 2% of carbon nanotubes, C... see more

The paper presents a comparative study between the properties of a conventional binder and a polymer-modified binder, as well as some mechanical properties of hot mix asphalt concrete (HMA) made with these binders. The comparation of binder based on conve... see more

To evaluate the effect of rejuvenating agent on reclaimed SBS (styrene-butadiene-styrene) modified asphalt pavement (RSMAP) material, different tests of asphalt and mixtures were conducted. Firstly, the improvement effect of rejuvenating agents on the age... see more

As a natural modifier of asphalt, rock asphalt has been widely used to improve its thermal stability and aging resistance. However, the thermal cracking resistance of asphalt modified by rock asphalt is unsatisfactory. In order to improve the thermal crac... see more

Long-lasting asphalt pavements as a concept arose in the late XX century. According to assumptions it is possible to achieve durability even for 50 years. The key to achieve so long-lived is appropriate choice of an asphalt binder, except for the relevant... see more

Laboratory tests were used to evaluate the effect on the mechanical properties of a hot asphalt mix (MDC-2 as per INVIAS, 2007 specifications) due to the addition by wet way of a residue of low density polyethylene (LDPE). The strength under monotonic loa... see more

This study was carried out to investigate the performance of Hot and Warm mix asphalt (HMA and WMA) with dissolved plastic bottle (DPB) modified bitumen. In this study, 1 - 17% @ 2% DPB by weight of bitumen was blended with 60/70 straight-run bitumen to p... see more

The present work describes different stages that the Urban Development Institute (IDU) has addressed to achieve the adequate and correct application of crumb rubber modified (CRM) asphalt mixtures. The first research stage in the laboratory included an ex... see more

1 of 893 pages  |  10  records  |  more records»