ARTICLES

Filter  
Active filters 0
Remove
  

Refine your searches by:

Collections
Biology
Education
Agronomy and forestry
Economy
Social Sciences
Pure sciences
Technology
Public health
Research
Medicine / Sub specialtie
all records (74)

Languages
English
Spanish
German
Portuguese
French
Finnish

Countries
Indonesia
USA
Brazil
Ukraine
Romania
South Africa
Italy
Spain
Turkey, Turkish Republic
Poland
all records (76)

Years
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
all records (24)

Filter  
 
27.460  Articles
1 of 2.746 pages  |  10  records  |  more records»
The present work is a re-evaluation of previous research on the durability of hot-mix asphalt made with recycled concrete aggregates from construction and demolition waste (CDW) with a different approach. Response surface methodology (RSM) was used to con... see more

The type of damage to the pavement layer is cracking and permanent deformation. The mechanism of cracking in the pavement layer occurs because of the tensile force at the bottom of the pavement layer due to the wheel load of the vehicle. One parameter of ... see more

Asphalt mixes with Reclaimed Asphalt Pavement (RAP) offer many advantages when reusing this material. But without the adequate treatment, these mixtures present durability problems due to the material’s loss of properties over time. The use of copper... see more

Subgrade soils encountered during road construction are not always good materials to respond to the imposed stresses which has become a dominating factor for the failure of pavements in Nigeria. The subgrade materials were sourced from three locations wit... see more

It may be stated that the main reason for the failure of asphalt pavement, especially early damage, is due to destruction and loss of adhesion properties of bitumen in the asphalt mix. Stripping is the weakening or the loss of adhesion between the aggrega... see more

A model for prediction of Indirect Tensile Strength (ITS) of Reclaimed Asphalt Pavement (RAP) specimens is developed in this study using Machine Learning (ML) technique. Principal Component Analysis (PCA) was used to transform grading curves of RAP and ob... see more

In order to explore the moduli decay patterns of asphalt mixtures under different loading conditions, the nonlinear fatigue damage model was implemented in order to simulate the moduli decay patterns. Then, the direct tensile, indirect tensile, and uniaxi... see more

One of the objectives within the European research project CoRePaSol (supported within the CEDR Transnational Program) was to summarize assessment and research of stiffness modulus of cold recycled mixes determined according to repeated indirect tensile s... see more

This study evaluated the shear stress distribution on the adhesive interface and the bond strength between resin cement and two ceramics. For finite element analysis (FEA), a tridimensional model was made using computer-aided design software. This model c... see more

1 of 2.746 pages  |  10  records  |  more records»