ARTICLE
TITLE

Experimental analysis of dewpoint indirect evaporative cooler operating with solar panel

SUMMARY

M-cycle (Maisotsenko cycle) based indirect evaporative cooling system can significantly enhance the natural ecosystem. The operating cost of dewpoint indirect evaporative cooler (Dewpoint-IEC) is low for space air cooling systems. Dewpoint-IEC is inexpensive, energy efficient, and ecological friendly. This study illustrates the experimental evaluation of Dewpoint-IEC working with varying operating conditions. The system designed for up to 1 Ton cooling capacity of the system which has coefficient of performance and energy efficiency ratio up to 6 and 20. The experimentation of Dewpoint-IEC is investigated in terms of the relative humidity and ambient temperature. The results indicate that the effectiveness of the Dewpoint-IEC system is increased with decrease the relative humidity and increase the ambient air temperature. The highest experimental values of wet bulb and dewpoint effectiveness of the system is 1.11 and 0.76. The maximum resulting values of EER, COP, and cooling capacity is 19, 6.1, and 3.3 kW, respectively. Based on experimental results, the system is a feasible option in hot summer days. Moreover, the power consumption of the Dewpoint-IEC is 70 W which can be achieved by combining the system with solar panels. So, current research also shows that Dewpoint-IEC integrated with solar panel recommends off-grid solution as well.

 Articles related

ICIPPSD Conference    

During braking process, the kinetic energy of vehicle reduces and gets converted in thermal energy due to friction between disk and brake pads. The disk brake is used to retard the motion of vehicle by pressing brake pads against disk rotors. The frequen... see more


ICIPPSD Conference    

This paper deals with experimental and finite element analysis of the stretch flanging process using AA- 5052 sheets of 0.5 mm thick. A parametrical study has been done through finite element simulation to inspect the influence of procedural paramet... see more


Mr. Prashant Jadhav, Dr. Chinmaya Prasad Mohanty    

Nickel based superalloys finds extensive usage in manufacturing of intricate part shapes in gas turbine, aircraft, submarine, and chemical industries owing their excellent mechanical property and heat resistant abilities. However, machining of such diffi... see more


ICEPE Conference, Engr. Muhammad Kaleem, Dr. Muzaffar Ali    

Solar energy is sufficient source of energy for a solar-rich country like Pakistan to meet its energy needs. The Solar thermal technologies such like evacuated tube, flat plate, and compound parabolic trough collectors is being used all around the world.... see more


ICEPE Conference, Dr. Muhammad Shehryar, Dr. Muzaffar Ali    

The limited availability of fossil fuels, as well as its negative ecological repercussions, has prompted humanity to seek other renewable technologies. One of the obvious options is solar energy, especially for energy deficient and solar rich countries l... see more