Journal title
ISSN:    frecuency : 4   format : Electrónica

Issues

      see all issue


Skip Navigation Links.

Volume 23 Number 4 Year 1932

16 articles in this issue 

Pakawan Chotchaiwong, Saowanee Wijitkosum

The relationship between land surface temperature (LST) and land use in Nakhon Ratchasima was studied using data gathered from three satellite images from Landsat-5 (30th January 1992), Landsat-8 (9 May 2016) and THEOS (17th February 2016). There were fou... see more

Pags. 1 - 14  

Thaksina Poyai, Phuntharee Khiewpuckdee, Aunnop Wongrueng, Pisut Painmanakul, Nattawin Chawaloesphonsiya

Separation of stabilized oil droplets was conducted via crossflow ultrafiltration (UF) in a laboratory scale. A plate-and-frame membrane module was operated with two commercial organic membranes: regenerated cellulose (RC) and polyethersulfone (PES). Cutt... see more

Pags. 15 - 27  

Suravit Naksusuk, Chaiyot Tangsathitkulchai

Performance of CO2 adsorption was investigated in a fixed bed of coconut shell activated carbon impregnated with sodium hydroxide with emphasis on the effect of alkali loading and carbon pore texture. CO2 adsorption capacity increased with the increase of... see more

Pags. 29 - 48  

Songwut Mongkonlerdmanee, Saiprasit Koetniyom

Realistic driving cycles for Thailand’s road conditions were studied only for the pollution problems of passenger cars and light-duty trucks in urban areas of the metropolitan region. Such driving cycles did not cover rural areas and the in-use operation ... see more

Pags. 49 - 65  

Tantri N. Handayani, Veerasak Likhitruangsilp, Nobuyoshi Yabuki

Change orders are inevitable in most construction projects. The conventional change order practice is usually associated with 2D drawings and various paper-based documents, which cannot illustrate the existing and altered building conditions efficiently. ... see more

Pags. 67 - 90  

Trinnachoke Eiammanussakul, Viboon Sangveraphunsiri

Rehabilitation robots usually provide trainings with a certain training modality and activity. The patient’s performance measure such as mechanical power is also derived for those specific trainings. This article aims to demonstrate the implementation of ... see more

Pags. 91 - 105  

Phanatorn Amnuayphan, Rattapon Thanapatpanich, Prabhath De Silva, Pinunta Rojratsirikul

Water evaporation during windshield defrosting is investigated paying particular attention to the effects of air humidity and wind speed. During the defrosting process, the ice layer on the windshield begins to melt as the temperature of the def... see more

Pags. 107 - 119  

Parames Chutima, Trirat Kirdphoksap

The car sequencing problem (CSP) is addressed in this paper. The original environment of the CSP is modified to reflect real practices in the automotive industry by replacing the use of single-sided straight assembly lines with two-sided assembly lines. A... see more

Pags. 121 - 156  

Siwaporn Duangsri, Soorathep Kheawhom, Pornchai Bumroongsri

Data reconciliation is a mathematical approach that improves the quality of measurements by calculating the reconciled data that satisfies the process constraints. The conventional data reconciliation approach relies on the process model that contains the... see more

Pags. 157 - 169  

Nattapon Pornnumpa, Manthana Jariyaboon

Anodizing is one of the surface treatments for aluminum and its alloys. It is commonly used to increase corrosion resistance and mechanical properties. This technique is also applied for decorative purpose. Therefore, anodized aluminum alloys are widely u... see more

Pags. 171 - 181  

Patomporn Lakkanasri, Gobboon Lothongkum

This research studied the effect of monoethanolamine or MEA on corrosion of A283 carbon steels both in water and 5 vol.% propionic acid solution at boiling point temperature of solution. MEA concentrations ranging from 30 to 90 wt.% in water was used. The... see more

Pags. 183 - 191  

Seisho Take, Misaki Kikuchi, Taro Atsumi, Taiga Ogura, Ryutaro Takenaka, Haruki Koya, Fuga Kinbara

In this study, a thin molten sulfate film was formed on the metallic samples and their corrosion processes have been monitored by electrochemical impedance technique under thermal cyclic condition. Inconel 600, nickel and aluminide diffusion coatings were... see more

Pags. 193 - 204  

Prem Raj Shrestha, Hari Bhakta Oli, Bishal Thapa, Yogesh Chaudhary, Dipak K. Gupta, Anju Kumari Das, Krishna Badan Nakarmi, Sanjay Singh, Nabin Karki, Amar Prasad Yadav

Lantana camara, an invasive species that adversely affects habitant, bioregions and environment has been studied as corrosion inhibitor. Methanolic extract of barks of Lantana camara in 1 M hydrochloric acid was tested as corrosion inhibitor on mild steel... see more

Pags. 205 - 211  

Li-Bin Niu, Yang Xiao, Kunio Shiokawa, Mitsuo Yamashita, Yoshihiro Sakai

Immersion corrosion tests and electrochemical corrosion tests were carried out in the simulated geothermal water on a modified heat-treated material of 16Cr-4Ni steel, which is used for geothermal steam turbine blades. Incidentally, the purpose of the mod... see more

Pags. 213 - 221  

Mohsen Saeedikhani, Sudesh L. Wijesinghe, Daniel John Blackwood

A specific type of Zinc-Rich Paint was scratched and exposed in salt fog chamber for various exposure times up to 1,000 hours. The corrosion products that developed within the scratched region were studied by optical microscopy, scanning electron microsco... see more

Pags. 223 - 233  

Nantawat Khomwan, Pinai Mungsantisuk

Severe damage reinforced concrete structures affected by corrosion are increasing. The study of prevention and protection technique play an important role to cope this urgent issue. Usage of different types of surface coatings on concrete/rebar are highly... see more

Pags. 235 - 261