9 articles in this issue
Suttichai Assabumrungrat, Janewit Phromprasit, Amornchai Arpornwichanop
Walairat Uttamaprakrom, Tharapong Vitidsant
The main aim of this research was to investigate proximate analysis and heating value of wet cake waste from ethanol industry to be used as alternative fuels by carbonization at 400, 450, 500 and 550°C, vary times 30, 45, 60 and 90 minutes in oxygen-limit...
Weerin Wangjiraniran, Bundhit Eua-arporn
The objective of this study is to explore the scenarios of energy-related greenhouse gas mitigation in Thailand to 2030. The picture with no change of government policy which is relied on the existing plan namely 'reference scenario' is simulated. Ambitio...
Dewan Mowdudur Rahman, Navid Bin Sakhawat, Riasad Amin, Faisal Ahmed
Deficiency in energy sector is a major problem, which can hinder the development workflow of any country. Being the eighth most populated country in the world with a total electricity generation of only about 5000 MW and consumption of 144 kWh per capita,...
Meenakshisundaram Arulkumaran, William Christraj
This report presents experimental platform based on the design, development and performance characteristics of direct steam generation by non-tracking solar paraboloidal dish concentrating system. The performance of the concentrator is experimentally inve...
Pornchai Bumroongsri, Soorathep Kheawhom
In this paper, the model predictive control (MPC) algorithm for linear parameter varying (LPV) systems is proposed. The proposed algorithm consists of two steps. The first step is derived by using parameter-dependent Lyapunov function and the second step ...
Samia Sultana Mir, Syed M. N. Hasan, Md. J. Hossain, Mahbub Hasan
Natural fiber has a vital role as a reinforcing agent due to its renewable, low cost, biodegradable, less abrasive and eco-friendly nature. Whereas synthetic fibers like glass, boron, carbon, metallic, ceramic and inorganic fibers are expensive and not ec...
Thanyawat Pothisiri, Nattawut Hemathulin
Current fire safety regulations in Thailand require that primary structural steel components of buildings be protected to achieve a minimum of 3-hour fire-resistance rating. For steel roof structures, 1-hour or 2-hour fire-resistance ratings may be specif...
Anongnat Somwangthanaroj, Mongkol Tantiviwattanawongsa, Wiwut Tanthapanichakoon
Nylon 6/clay nanocomposite films were prepared by melt mixing nylon 6 with organoclay using a twin screw extruder attached to a blown film die. The type of surfactant used in the pretreatment of organoclay was expected to affect the degree of clay dispers...