ARTICLES

Filter  
Active filters 0
Remove
  

Refine your searches by:

Collections
Biology
Agronomy and forestry
Environment
Technology
Education
Research
Physical
Zoology
Pure sciences
Chemistry
all records (75)

Languages
English
Spanish
Portuguese
German

Countries
Indonesia
USA
Brazil
Ukraine
Italy
Romania
India
South Africa
Mexico
Lithuania
all records (77)

Years
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
all records (24)

Filter  
 
13.155  Articles
1 of 1.317 pages  |  10  records  |  more records»
This paper presents the results of density measurements carried out on Alumix sintered parts. ECKA Alumix aluminium powders were used because of their wide application in the powder metallurgy industry. The compacts were produced using a wide range of com... see more

The paper presents the study of the particle size distribution, surface area and their effecton sintering of alumina (Al2O3) using additives such as magnesium oxide (MgO) and silica (SiO2),so that the samples could be sintered to high relative density (~ ... see more

Calcined flint clay (45.6 wt.% Al2O3) and solid waste coal gangue were used to prepare low-density ceramic proppant by solid state sintering method. The density and breakage ratio of the ceramic proppant were systematically investigated as a function... see more

MgB2/CNT is a promising candidate for superconducting wire application due to its excellent mechanical properties and carbon nanotube’s low density. However, strong interfacial adhesion between the CNT reinforcement and the MgB2 matrix is difficult to man... see more

This paper addresses the prospects of recycling waste from oil and gas extraction in order to manufacture building materials. The principal possibility has been established to apply the examined samples of drilling sludge as the basic raw material and a m... see more

The effect of polysilazane on the densification and mechanical properties of SiCf/SiC composites was examined thoroughly. The polysilazane was infiltrated into the fiber area followed by pyrolysis at 1450°C for four h in an argon atmosphere. Furthermore, ... see more

The effect of polysilazane on the densification and mechanical properties of SiCf/SiC composites was examined thoroughly. The polysilazane was infiltrated into the fiber area followed by pyrolysis at 1450°C for four h in an argon atmosphere. Furthermore, ... see more

AISI 316L austenitic stainless steel powder was modified with four different amounts of boron (0.1; 0.2; 0.3; 0.4 of wt. %) in the form of MasterAlloy micro-powder, and was sintered in a pure dry hydrogen atmosphere in order to obtain high density sintere... see more

The research aims to study and optimize the formulation of materials required for advanced ceramic production using response surface methodology (RSM). In this research effort, the five (5) process independent variables studied with their corresponding le... see more

1 of 1.317 pages  |  10  records  |  more records»