ARTICLES

Filter  
Active filters 0
Remove
  

Refine your searches by:

Collections
Technology
Mechanical Engineering
Physical
Industrial engineer
Pure sciences
Chemistry
Mathematics
Research
Economy
Architecture and Urbanism
all records (54)

Languages
English
Spanish
German
French

Countries
USA
Ukraine
Indonesia
Lithuania
India
Nepal
Brazil
Russia
South Africa
Slovak Republic
all records (46)

Years
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
all records (24)

Filter  
 
798  Articles
1 of 81 pages  |  10  records  |  more records»
Particle strengthening was studied in Sn-xSb (x=0.5–3.0 wt. %). Tensile deformation behavior of Sn-2.5 wt.% Sb is investigated at temperature ranging (298 - 343K) and under different constant loads ranging (5.1 - 14.0 MPa). The microstructure characterist... see more

Purpose. Development of multi-alloyed filler for abrasive wear-resistant composites. Methodology. The methods of microstructural, X-ray and energy-dispersive X-ray analyses were used to achieve research purpose. Micro-mechanical properties ... see more

In this work the study is performed for the specimens of Fe-B-C alloys with boron content of 0.005–7.0 wt. % and carbon content of 0.4–6.67 wt. %, the rest is iron. According to the findings of microstructure analysis, XRD and differential therm... see more


Studi tentang smart materials cukup menyita perhatian dalam beberapa tahun terakhir, salah satunya yaitu tentang Shape Memory Alloys (SMA). Banyak penelitian yang telah dilakukan untuk mengembangkan SMA menggunakan paduan Ni-Ti, namun karena paduan terseb... see more

The ion and laser irradiation of the zirconium alloys leads to the formation of amorphous phases in a layer of depth up to 3000 ?. It was found that thermal annealing of the irradiated foils of alloys held to a two stage. In the result of laser irradiatio... see more

The study was performed on alloys with a carbon content of 0.37-0.57% (wt.), silicon 0.23-0.29% (wt.), manganese 0.7-0.86% (wt.), the rest– iron. To determine the phase composition of alloys used microstructural, microanalysis and X-ray analysis. In ... see more

Heusler type alloys Ni50Mn25+xGa25-x  (x=2,3,4 and 5) based on near stoichiometric Ni2MnGa compositions were directionally solidified using modified Bridgman method. The alloys thus prepared were characterized for their chemical composition, crystal ... see more

Quaternary Ni50FexMn30-xGa20 (x = 2.5, 5, and 15) and Ni45Fe5Mn30Ga20 alloys based on modification of ferromagnetic shape memory alloy ternary Ni50Mn30Ga20 composition prepared by vacuum arc melting and subsequent heat-treatment were investigated to under... see more

1 of 81 pages  |  10  records  |  more records»