ARTICLES

Filter  
Active filters 0
Remove
  

Refine your searches by:

Collections
Education
Technology
Social Sciences
Economy
Research
Languages
Architecture and Urbanism
Literature
Pure sciences
Computing
all records (73)

Languages
English
Spanish
Portuguese
German
French
Finnish

Countries
Indonesia
USA
Brazil
Ukraine
South Africa
Italy
Cuba
Austria
Germany
United Kingdom
all records (76)

Years
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
all records (24)

Filter  
 
42.877  Articles
1 of 4.289 pages  |  10  records  |  more records»
Tribological phenomena and tool wear mechanisms during machining of hard-to-cut TiAl6V4 aerospace alloy have been investigated in detail. Since cutting tool wear is directly affected by tribological phenomena occurring between the surfaces of the workpiec... see more

The difficulties in the machining of duplex stainless steel are well known. However, research on this matter is rather limited. Suppliers offer quite different cutting tools for the same raw material, with end mills of two, three or even four knives and a... see more

In this study, the wear mechanisms and tribological performance of uncoated and coated carbide tools were investigated during the turning of super duplex stainless steel (SDSS)—Grade UNS S32750, known commercially as SAF 2507. The tool wear was evaluated ... see more

In the machining process, it is difficult to solve problems due to the relationship between productivity and quality, for example, as the productivity increases, the quality of reprocessing may decrease. Some methods only address specific objectives, such... see more
Micro |  EDM |  coated |  electrode |  Topsis |  Al |  OVC |  Z |  Carbon |  Taguchi
In this research work we have coated WC (tungsten carbide) tool inserts with diamond like carbon coatings. The deposition was done using the thermal Chemical Vapour Deposition (CVD) method. We have used bagasse of sugarcane which is an agriculture waste a... see more

In this paper a self-developed polycrystalline diamond coating was done on tungsten carbide (WC) tool insets by using simple thermal chemical vapor deposition technique. The growth of these diamond films has been carried out at ~900 ºC temperature. The as... see more

The present study investigated the machinability aspects namely, surface roughness, sound intensity, power consumption and crater wear during dry turning of hardened AISI 4140 steel (63 HRC) employing (TiCN/Al2O3/TiN) multilayer-coated carbide inserts. Th... see more

In the machining of metal cutting, cutting tools are the main things that must be considered. Using improper cutting parameters can cause damage to the cutting tool. The damage is Built-Up Edge (BUE). The situation is undesirable in the metal cutting proc... see more

In the machining of metal cutting, cutting tools are the main things that must be considered. Using improper cutting parameters can cause damage to the cutting tool. The damage is Built-Up Edge (BUE). The situation is undesirable in the metal cutting proc... see more

1 of 4.289 pages  |  10  records  |  more records»