ARTICLE
TITLE

Effect of Cutting Parameters on Power Consumption and Tool Wear during Turning of EN31 Steel under Minimum Quantity Solid Lubrication

SUMMARY

This paper reports the comparative investigation of effect of cutting parameters i.e. cutting speed, feed and depth of cut on power consumption and too wear during turning operation of EN31. Three cooling techniques were employed during the turning operations of which one is Minimum Quantity Solid Lubrication (MQSL). Calcium Fluoride powder used as solid lubricant and mixed with SAE 40 oil, which was used as MQSL cooling technique. The experimental results highlight the power consumption was less during MQSL cooling technique. Further, the tool wear was also less in MQSL cooling compare to other cooling technique.

PAGES
pp. 6 - 12

 Articles related

Sobron Yamin Lubis,Sofyan Djamil,Yehezkiel Kurniawan Zebua    

In the machining of metal cutting, cutting tools are the main things that must be considered. Using improper cutting parameters can cause damage to the cutting tool. The damage is Built-Up Edge (BUE). The situation is undesirable in the metal cutting pro... see more


Dervis OZKAN, Mustafa Sabri GOK, Hasan GOKKAYA, Abdullah Cahit KARAOGLANLI    

Reduction of machining times and optimization of cutting parameters and conditions hold great importance in machining processes. Milling is among the most important machining processes used for machining of fiber-reinforced composite materials. The prese... see more


Hendri Yanda,Jaharah A. Ghani,Che Hassan Che Haron    

Demand for higher productivity and good quality for machining parts has encourage many researchers to study the effects of machining parameters using FEM simulation using either two or three dimensions version. These are due to advantages such as softwar... see more


Elif Kinik,Fisun Gürsel Çelikel    

Rosa canina L. cuttings were obtained from the flora of Ondokuz Mayis University campus of Kurupelit. Woody cuttings were placed into the medium of perlite and turf mixture with a ratio of 1:1 under mist propagation system with bottom heating system. Ro... see more


Rüstem Cangi,Gözde Öncel Deveci    

In this study, the effects of re-cutting, wounding and disbudding over the base of dormant rootstock cuttings on the grafting success, final take and grapevine sapling quality in grafted grapevine sapling production were investigated. Five different trea... see more