SUMMARY
Published data on the hydrodynamics of ebullated- bed reactors (EBRs) used in the H-Oil process are scarce. In the present work, the effect of solid properties (e.g., particle size, and degree of hydrophobicity) on the hydrodynamics and foaminess in a lab-scale cold model of an (EBR) was investigated. 20wt.% MgSO4 solution was utilized as the liquid phase to imitate the hydrodynamic trends in the industrial-scale EBR of the hydro-conversion process. Experimental results depicted that the flow regime of the multiphase system can be readily evaluated by using the pressure drop technique. The turning from the bubbly to the turbulent system is enhanced with diminishing particle size and decreasing particle hydrophobicity. Moreover, the degree of particle hydrophobicity was inversely proportional to the average gas holdup in the EBR. The reduction in average gas holdup was 7.9 % using hydrophobic particles more than that of the hydrophilic one. In the EBR, it was found that bubble sizes were increased with both gas velocity and the axial location far from the gas distributor. The experimental work revealed that hydrophobic particles of smaller size (250 µrm) reduced foaming by 70% using 20 vol.% of solid loading and gas and liquid velocities of 10 and 0.18 cm s-1 respectively. This outcome revealed that the surface of catalyst particles can be modified to act as foaminess- reducer in fluidized bed hydroconversion reactors.