ARTICLE
TITLE

Experimental and numerical evaluation on performance of potable water productivity with rectangular fins basin triangular solar still

SUMMARY

Demand and conservation for potable water has become a foremost concern world-wide. Many technologies were adapted for converting the saline water to potable water to meet the required demand on water conservation. In the current research work triangular solar still with rectangular-fins attached to the basin is proposed to enhance the output of potable water from the solar still setup. Solar still with and without rectangular-fins on the basin are fabricated for experimental comparison and evaluation in addition to numerical investigations. Thermal Performance, instantaneous efficiency and potable water output of the proposed solar still & base solar still are investigated during March month for the location of Sathyamangalam. Investigation shows enhancement of water production in the proposed solar still by 41% higher compared to the base still. The maximum distillate output from modified still and base still for a typical day is 3.1 liter and 2.2 liter respectively.

 Articles related

Mohamed Al-Dawody, Khaled Al-Farhany, Naseer H. Hamza, Dhafer A. Hamza    

Great attention is directed towards the study of the spray phenomena theoretically and experimentally due to its dramatic effect on the combustion process that occurred in an internal combustion engine, in particular, the diesel engine. The spray macrosc... see more


Chandrasekar Pichandi    

Improving engine performance is a constant challenge and various methodologies have been adopted by researcher’s world over. In this work, the dispersion characteristics of a rotating injector is studied by varying the umbrella angle (UA) followed by its... see more


EMSME 2020    

Environmental contamination has been increasing day by day due to increase in use of fossil fuel, therefore world is moving towards unconventional sources of energy generation. In this study, a diesel engine characteristic was analysed in a single cylind... see more


ICCEMME Conference    

Numerical investigation of penetration characteristics of 6mm SS304 preformed spherical fragments released from a Fragment Generator Warhead (FGW) impacting on Steel 1006 target plate of 1 mm, 3 mm and 6 mm thick in velocity range 1000 m/s to 5000 m/s an... see more


ICIPPSD Conference    

During braking process, the kinetic energy of vehicle reduces and gets converted in thermal energy due to friction between disk and brake pads. The disk brake is used to retard the motion of vehicle by pressing brake pads against disk rotors. The frequen... see more