RANCANGAN PROTOTIPE MESIN PENGERING GABAH BERBASIS TEKNOLOGI HYBRID
Prototype Design of Grain Dryer Machine Based on Hybrid Technology
Abstract
Until now, the process of processing paddy into rice still relies heavily on the traditional and commonly used methods. During the drying stage, the harvested rice grains are spread out and sun dried. To address this issue, an effective solution is needed to enhance the quality of of rice seeds. Therefore, a post harvest rice handling technology is being developed with a hybrid technology based grain drying tool, where solar energy is still harnessed through photovoltaic solar panels (PLTS). The purpose of this research is to design, develop, and test a prototype grain drying machine abased on hybrid PLTS technology. The research focuses on calculating the power drying, and evaluating the PLTS system. The methods used include testing grain drying with variations in temperatures of 45ºC, 50ºC, dan 51ºC , as well as a grain weight of 8 kg. the greatest energy consumption during drying is directed towards the PLTS battery system, and calculations are performed to determine the duration of battery usage. The research findings reveal drying efficiencies of 9.7%, 12.8%, and 13.12% and final mouisture contents of 16.3%, 14.6% and 14.1 % at temperatures of 45ºC, 50ºC, and 51ºC respectively. The optimal drying times are 2 hours at 45ºC and 50ºC, and 1.5 hours at 51ºC. the battery usage time with a power of 209 W is 2.3 hours.
References
Badan Pusat Statistik, “Luas Panen dan Produksi Padi di Indonesia 2022,” Berita Resmi Statistik No. 21/03/Th. XXVI, pp. 1–20, 2023.
A. Sukoco, “Rancang Bangun Rotary Dryer Tipe Hybrid untuk Pengeringan Gabah,” Universitas Sumatera Utara, Medan, 2018.
Badan Standardisasi Nasional, “Bedah SNI Produk Unggulan Daerah,” Workshop Perumusan SNI, Makassar, Oct. 25, 2017. Accessed: Aug. 23, 2023. [Online]. Available: https://bsn.go.id/uploads/download/4._SNI_unggulan_SulSel_-_TAR_Hanafiah_1.pdf
M. P. Sitorus, “Analisis Alat Pengering Gabah menggunakan Panel Surya Berbasis Arduino,” Universitas Medan Merdeka, Medan, 2023.
A. Brillian, Purwanto, and Rahmadwati, “Pengendalian Temperatur pada Proses Pengeringan Gabah menggunakan Alat Rotary Dryer Berbasis Mikrokontroler Arduino Uno,” Jurnal Mahasiswa Teknik Elektro Universitas Brawijaya, vol. 3, no. 7, pp. 1–6, 2015.
M. F. Suhelmi, R. D. Anjani, and N. Fauji, “Perhitungan Efisiensi Pengeringan pada Mesin Pengering Gabah Tipe Flat Bed Dryer di CV. XYZ,” Jurnal Rekayasa Mesin, vol. 17, no. 1, pp. 15–20, 2022.
I. A. Ramli, Jamaluddin, and S. Yanto, “Laju Pengeringan Gabah menggunakan Pengering Tipe Efek Rumah Kaca (ERK),” Jurnal Pendidikan Teknologi Pertanian, vol. 3, pp. 158–164, 2017.
T. Panggabean, A. Neni Triana, and A. Hayati, “Kinerja Pengeringan Gabah menggunakan Alat Pengering Tipe Rak dengan Energi Surya, Biomassa, dan Kombinasi,” Agritech, vol. 37, no. 2, pp. 229-235, 2017, doi: 10.22146/agritech.25989.
P. Harahap and M. Adam, “Efisiensi Daya Listrik pada Dispenser dengan Jenis Merk Yang Berbeda menggunakan Inverator,” RESISTOR (Elektronika Kendali Telekomunikasi Tenaga Listrik Komputer), vol. 4, no. 1, pp. 37-42, 2021, doi: 10.24853/resistor.4.1.37-42.
B. Setiawan, S. Yulianto, T. Junaedi, and I. Efendi, “Rancang Bangun Mesin Traktor Pembajak Sawah Berbasis Tenaga Solar Cell Digerakkan Remote Control,” PROSIDING Seminar Nasional Sains Dan Teknologi , pp. 1–12, 2021.
V. F. Putra, “Rancang Bangun Prototipe Pemanas Udara Model Spiral untuk Sistem Pengering Biji Gabah dan Jagung,” Universitas Islam Negeri Maulana Malik Ibrahim, Malang, 2021.
D. Sumardiyanto and E. N. H. P. Prasetyo, “Mesin Perontok Padi menggunakan Energi Surya Skala Usaha Kecil Menengah untuk Masyarakat Di Kabupaten Subang Jawa Barat,” KAMI MENGABDI, vol. 1, no. 1, pp. 1–14, 2021.
A. Julisman, I. D. Sara, and R. H. Siregar, “Prototipe Pemanfaatan Panel Surya Sebagai Sumber Energi pada Sistem Otomasi Atap Stadion Bola,” KITEKTRO : Jurnal Online Teknik Elektro, vol. 2, no. 1, pp. 35–42, 2017.
I. G. N. A. Mahardika, I. W. A. Wijaya, and I. W. Rinas, “Rancang Bangun Baterai Charger Control untuk Sistem Pengangkat Air Berbasis Arduino UNO Memanfaatkan Sumber PLTS,” E-Journal SPEKTRUM, vol. 3, no. 1, pp. 26–32, 2016.
A. U. Utami and R. Ulfa, “Efek Lama Pengeringan terhadap Kada Air Gabah dan Mutu Beras Ketan ,” Jurnal Teknologi Pangan dan Ilmu Pertanian, vol. 4, no. 1, pp. 32–36, 2022.
A. G. Damayanti, R. Ulfa, and B. Setyawan, “Proses Pengeringan Gabah pada Industri Pembenihan Padi di PT. Padi Nusantara-Rogojampi,” Jurnal Teknologi Pangan dan Ilmu Pertanian, vol. 4, no. 1, pp. 8–12, 2022.
Copyright (c) 2024 Jurnal Konversi Energi dan Manufaktur
This work is licensed under a Creative Commons Attribution 4.0 International License.
