37 articles in this issue
M.A. Pund,Shital Bahale,Jaya Ingole
Prolonging lifetime of wireless sensor network is a most significant problem due to energy constraint nature of sensor nodes. It is difficult to recharge nodes during network lifetime, to increase application area of WSN there is a need to design energy e... see more
Sanjay Nikhade,Suhas Kongre,S. B. Thakre,S. S. Khandare
This paper presents a combined experimental and Computational Fluid Dynamics (CFD) simulation of Micro wind Turbine with 2.28 meters rotor Diameter is performed using the FLUENT 16.2 WORKBENCH. A Micro Horizontal Axis Three Blade Wind Turbine was designed... see more
Anagha Pathak,Kiran Deshpande,Sandesh Jadkar
There is a huge potential to deploy solar thermal energy in process heat applications in industrial sectors. Around 50 % of industrial heat demand is less than 250 °C which can be addressed through solar energy. The heat energy requirement of industries l... see more
Bhojraj Kale,V.N. Borikar,P.A. Hatwalne,V. M. Nimbalkar
The increasing demand of petroleum and its availability is inversely to each other. This gives the new area to researcher to find out the solution to this problem. This problem is also concern with socioeconomically issue; the solution should be acceptabl... see more
Shreyas Gulhane,Sanjay Gulhane
Due to rise in unleashed industrial development, our world is now engulfed by solid wastes. In that huge pile of wastes, plastic is one of the prime culprits for degrading our nature. The used plastics (which are not recycled) are either end up in oceans ... see more
Pavitra Patel,A. A. Chaudhari,M. A. Pund,D. H. Deshmukh
Speech emotion recognition is an important issue which affects the human machine interaction. Automatic recognition of human emotion in speech aims at recognizing the underlying emotional state of a speaker from the speech signal. Gaussian mixture models ... see more
Vaibhav Satpute,Anand Jawanjal
Sun provides abundant source of renewable energy that can be integrated with the electrical grid. Climate change issues have compelled policy makers to look into various ways to reduce carbon footprint and use green, renewable energy. Solar power, along w... see more
A.R. Mhaske,P. J. Nikam
The rising population has not only increased the fresh water demand but also increased the volume of wastewater generated. Increasing need for water has resulted in the emergence of domestic wastewater application for agriculture and its relative use. In ... see more
Jitendra Saturwar,D.N. Chaudhari
With the growth in digital world, it is becoming more important to find a method toprotect the security of digital media. An image watermarking model based on visual secretsharing (VSS) is proposed for protection of ownership. In the embedding phase, thew... see more
Sanjay Shirbhate
The concept of this paper is to develop idea of multipurpose machine as by conducting various operation on same machine, using single operating system. Here, in this machine there is a electric motor which is connected to the pulleys driven by belt (more ... see more
K. R. Gawande,A. V. Deshmukh
An experimental investigation was carried for measuring tube-side heat transfer coefficient, friction factor, heat transfer enhancement efficiency of water for turbulent flow in a circular tube fitted with rectangular-cut twisted tape insert. A copper tub... see more
Vinod Datir,B. N. Lahari,Vijay Kale
-
Prakash Patil
Nowadays due to the tremendous growth of residential and commercial buildings it is very much essential to design and simulate IR Wireless channel inside the building. Here we need to consider the room configurations and several techniques such as FFT and... see more
Supriya Deshpande,Shirish Pattalwar,Poonam Lohiya
A number of android security and privacy vulnerabilities have been exposed in past several years. However, the mobile malware and privacy leakage remain a big threat to mobile phone security and privacy. It has been observed that phone camera would become... see more
Ram Vighe
Reinforced concrete bridges may have various systems: Beam (with simply supported or continuous beams), Frame, Arch, or combined of it.. Beam reinforced concrete bridges are the most common type, Spans with plate structure are generally used to cover gaps... see more
P.J. Bansod,S.B. Thakre,N.A. Wankhade
Conventional energy sources like coal and oil used for power generation causes various environmental problems like creating pollution and creating ecological imbalance. These sources are also depleting due to lesser use of alternative resources. Chimney o... see more
P.R. Chavan,Ummid Shaikh
The theoretical study of steady, one-dimensional, isentropic, compressible fluid flow suggests that a convergent-divergent passage is required for accelerating a compressible fluid to supersonic velocities. It also reveals that along with pressure, temper... see more
Satish Bahaley,Rasika Khairkar
Shearing is the process to cut sheets using pair of blades, by applying shear stress along the thickness of the sheet. Shearing happens by extreme plastic deformation followed by breaking which propagates deeper into the thickness. The upper blade is fixe... see more
Utkarsh Gawande,Shubham Kanhake,Arjun Lahane,Prasanna Naghbhide
Black cotton soil is a expansive soil. And mostly found in Vidarbha region of Maharashtra, this soil is highly unstable and it should be stabilize for carry out construction work. Materials like fly ash, rise husk, nylon fiber are used to make soil stable... see more
Ajay Pardey,V. S. Sapkal,R. S. Sapkal
Membrane bioreactor (MBR) technology is advancing rapidly around the world both in research and commercial applications. Despite the increasing number of studies and full-scale applications of MBR systems, directions and trends in academic research as wel... see more
Prakash Burade,Rajendra Sadafale,Anand Satpute
A Repeated Power Flow with FACTS devices including ATC is used to evaluate the feasible ATC value within real and reactive power generation limits, line thermal limits, voltage limits and FACTS operation limits. An IEEE-30 bus system is used to demonstrat... see more
Satish Bahale,Amit Shende
Tapping operation which refers to production of internal threads forms an integral part of any machine shop and it is intended to provide semi permanent fastening to the components of product so as to lend themselves for repairs and replacements. Though v... see more
R. R. Chaudhari,P. R. Gharde
In diesel compression ignition engine, simultaneous reduction of NOx and PM is extremely challenging task. The most favorable solution for this is HCCI. It is an impulsive auto ignition of very lean air fuel mixture at multiple sites. It has advantages of... see more
Mayuri Rajas,M. A. Pund
The Internet of Things (IoT) has evolved from just being an experimental concept, and is now completely transforming the ways in which industries operate. Forbes calls the Internet of Things a giant network of connected things, with relationships between ... see more
Vishakha Nandanpawar
In view of current economic and industrial growth, the whole world is facing various Sustainability challenges like Climate change and Global warming, energy management, food security, poverty, water scarcity and many more. To address these issues properl... see more
M. D. Hambarde,Ramakant Shrivastava,S.R. Thorat,O.P. Dale
Due to higher ozone layer depletion potential of HCFC refrigerant, R22 which has been mostly used in house hold refrigeration will be phased out by 2020 as per Montreal Protocol and UNFCCC Regulations. R407C, a zeotropic refrigerant from HFC category is a... see more
Nikhil Gala,K.D. Desai
Magnetic resonance imaging (MRI) system projects the anatomical structures of brain ontospatial domain. Three-dimensional (3D) construction of brain tumor using several slides of MRI hasalways been of keen interest for diagnosis and for research purpose. ... see more
Samir Deshmukh,Sagar Charthal
Wind energy is the kinetic energy associated with movement of large masses of air. These motions result from uneven heating of atmosphere by sun creating temperature, density, pressure differences. It is an indirect form of solar energy The device used to... see more
Anil Onkar,Gunwant Dhomane,Ravindra Moharil
Engineering based on basic principle of combustion process ,associated thermodynamics,& basic engineering principles involved in optimization of heat rate and in-house auxiliary consumption as energy input (i.e. coal consumption & in-house auxiliary consu... see more
Kusmierczak Sylvia,Naprstkova Natasa
Aluminum alloys are frequently subjected to machining process and for this process is important their machinability, which depends on many factors. The Faculty of Production Technology and Management is often asked by companies with a request to solve a s... see more
Nitin Ingole,Mangesh Gulhane
Constructed wetlands are systems of artificial wastewater treatment which consists of shallow ponds or channels that have been planted with aquatic plants. The treatment is based on the natural, biological, physical and chemical treatment of wastewater. T... see more
Kishor Sontakke,Samir Deshmukh,Sandip Patil
The growing demand for electrical energy for industrial and domestic use, coupled with the limited amount of available fossil fuel reserves and its negative effects on the environment, have made it necessary to seek alternative and renewable energy source... see more
Umesh Kaware,Sanjay Gulhane
The emerging High Efficiency Video Coding (HEVC) standard is a new improved next generation video coding standard. HEVC aims to provide improved compression performance as compared to all other video coding standards. To improve the coding efficiency a nu... see more
Irena Lysonková,Jan Novotný,Jaromír Cais,Štefan Michna
In this article is described the creation nanocomposite coating. It is PTFE coating with the addition ofparticles based on titanium dioxide on the size „nano“. Working with nanoparticles is demanding notonly of safety, preparing particles of a size „nano“... see more
Hemant Nandanpawar
Transport sector is one of the largest contributors of energy related greenhouse gas (GHG) emissions globally and is expected to grow 50 percent by 2050. Controlling GHG emission growth of transport sector is necessary in view of limiting the global tempe... see more
Gurunath Shinde,Prakash Dabeer
Friction welding is a solid state welding processes in which the weld is obtained by the heat generated due to forging and friction. Now a day’s eco-friendly joining of dissimilar materials is the need of the industries. The advantages of friction welding... see more
R.N. Panchal,A.D. Awasare,J.R. Panchal,V.M. Jamadar,G.V. Shinde,H.M. Kumbhar,A.M. Zende
Plant layout is related with the arrangement of machines, equipment, storage vessels, materials, workplace and warehouse. It is need to the design constraints arising from safety for humans, environment conditions, construction, maintenance, an... see more