Issues

      see all issue


Skip Navigation Links.

Volume 9 Number 1 Year 2021

29 articles in this issue 

Iqbal Mahmood Alwan,Narjis Hadi Irhaif,Asma Najim Abdullah

Factor analysis is distinguished by its ability to shorten and arrange many variables in a small number of linear components. In this research, we will study the essential variables that affect the Coronavirus disease 2019 (COVID-19), which is supposed to... see more

Pags. 3 - 10  

Aqeel Kamil Kadhim

Digital images need a large storage capacity, and as a result they need a large bandwidth for data transmission to deliver to the desired destination over the network. Image compression technologies not only reduce the size of stored data, but also mainta... see more

Pags. 11 - 28  

Ali Mohammed Sahan,Ali Sami Al-Itbi,Jawad Sami Hameed

COVID-19 has become a great challenge to the whole world, as it has infected and killed millions of people and affected the different fields of our life due to its rapid ability to spread. In this paper, the COVID-19 patient's recognition technique utiliz... see more

Pags. 29 - 36  

Nora H. Sultan,Noor Hassan Abed Khammas,Ziadoon Hassan Najm

Watermarking is used mostly for multimedia data copyright protection. This paper introduces the Transformation Framelet (FLT) for watermarking digital images. In this technique, the FLT is used to create an original image and watermark the low (LL) freque... see more

Pags. 37 - 47  

Tuka Kareem Jebur

Wireless network sensors based on the mobile sink are regarded to be a common network and used in various fields in the last few years, they are thought to be easy to use, but contain the problem of energy loss and are affected by an energy hole problem, ... see more

Pags. 48 - 58  

Suad Kakil Ahmed,Huda Abdalkaream Mardan

In this research, algorithms were developed to assess the similarities between two or more images and reduce the time spent on searching for them based on the analysis of color intensity diversity and (histogram analysis), besides analyzing the partial pr... see more

Pags. 59 - 70  

Esmaeel Ali Alselmawi,Rahim Alhamzawi

Left-censored linear regression models are quite popular models and have been deeply considered in the last three decades. In this paper, we consider a completely Bayesian approach for making a new Markov chain Monte Carlo (MCMC) algorithm with tractable ... see more

Pags. 71 - 79  

Ibrahim A. Amory,Ahmed H. Ahmed,Zahraa Hasan

In modern techniques of building processors, manufactures using more than one processor in the integrated circuit (chip) and each processor called a core. The new chips of processors called a multi-core processor. This new design makes the processors to w... see more

Pags. 80 - 89  

Thamer Yahya Thamer,Nadine Nassif,Ayad H. Almaeini

Under conditions of freshwater scarcity in Iraq, farmers are looking to adopt more effective irrigation methods compared with conventional. In 2016 and 2017, a field experiment was performed over two years to evaluate optimal irrigation method for maize Z... see more

Pags. 90 - 103  

Alan Catovic

A review of external blast loads on structures modeling methods is presented in the paper. Also, numerical simulations of explosions in an urban scenario were done in software Ansys AUTODYN, and compared to experimental data. Recommendations were given re... see more

Pags. 104 - 126  

Gulnara S. Abdrassilova,Elvira T. Murzagaliyeva,Sabina Kuc

The formation of a regional identity is a very important cultural and socio-political trend in the formation of an independent state. Against the background of the acculturation of the Soviet period, in post-Soviet conditions there is a search for the ori... see more

Pags. 127 - 138  

Ali Hasan Abdulla,Nihad Raouf Maaroof,Taha Ibadalden Abdulkarim

Increasing the octane number of combustion machines by adding some chemicals and studying the effect of these additives on the internal combustion efficiency of the machines taking the consideration of surrounding conditions are present in this reserch. L... see more

Pags. 139 - 146  

Ahmed A. Hassan,Abdulkhaliq A. Jaafer,Haider H. Haider,Hussain K. Hashim,Karrar H. Shwaikh

The effect of using different types of aggregate on engineering properties of previous concrete is experimentally evaluated in this study. For this purpose, a total of four concrete mixes are cast and tested. The main parameters studied in this study are ... see more

Pags. 147 - 155  

Inaam Rikan Hassan

The current paper studies the performance efficiency of two uninformative priors, namely Bayes-Laplace (Uniform) prior and Jeffrey’s prior for Binomial model. Several performance measures, such as the Bayes estimators under different loss functions, the p... see more

Pags. 156 - 161  

Hayder Oleiwi Hayder Oleiwi,Yu Wang,Levingshan Augusthus-Nelson,Yan Wang,Gareth Whittleston,Majid Muttashar

It has been established that metakaolin (MK) can be applied as a supplementary cementitious material and that some polymers can enhance substantial properties of concrete. Previous studies showed that, when used in combination, MK and polymers can complem... see more

Pags. 162 - 173  

Mahmood S. Hashim,Ahmed M. Abdulhadi,Muntadher J. Taher

management of the paved network system is a critical issue that always has been the main focus not just in this university, but also to other educational institutions and organizations At the University of Baghdad. These extensive networks are crucial sys... see more

Pags. 174 - 183  

Faaza A. Almarsoomi,Israa A. Alwan

Arabic is a highly systematic language where its words exhibit elegant and rigorous logic. The field of Arabic word semantic similarity becomes more challenging due to its higher complexity and subtlety. This research is concerned with investigating the d... see more

Pags. 184 - 193  

Armas Elizabeth,Cruz Patricio,Soto Ricardo,Lema Henry,Granja Mario,Rosales Andrés,Zambrano Iván

In this work we present the development of a dynamic linear model of a 3UPS+1RPU parallel robot for knee rehabilitation, which allows the reduction of the error with respect to simulation carried out based on its non-linear model. Furthermore, the design ... see more

Pags. 194 - 215  

Israa A. Alwan Alwan,Faaza A. Almarsoomi

Image segmentation is regarded as the most crucial medical imaging process because it extracts the region of interest and thus helps upgrade medical diagnosis. The Geodesic deformable model is a curve that deforms within digital images to extract object s... see more

Pags. 216 - 226  

Izzat Niazi Sulaiman,Mohammed Jawad Zeinalabideen,Adnan Ajam Abed

World energy demand continues to increase, as they evolve, and developing countries consume more energy to keep their rising factories going. A significant portion of the energy demand is supplied by fossil fuels, especially crude oil. Therefore, in order... see more

Pags. 227 - 234  

Muatamed Abed Hajer,Samer Muthana Sarsam

Although the use of multimedia web design in education has drawn the interest of instructors in the modern learning process, the role of gender in such a process has not yet explored properly. The purpose of this research is therefore to evaluate the effe... see more

Pags. 235 - 241  

Mustafa Raheem Neamah,Hasanian Ali Thuwaib,Baraa I. Farhan

Network security from a long ago approaches to cryptography and hash functions which are tremendous and due to the weakness of different vulnerabilities in the networks and obviously there is a significant need for analyzes. In this manuscript, the state-... see more

Pags. 242 - 252  

Alaan Ghazi,S. A. Aljunid,Syed Zulkarnain Syed Idrus,Alaa Fareed,Aras Al-dawoodi,Zahraa Hasan,R. Endut,N. Ali,Aram Hewa Mohsin,Sirwan Saber Abdullah

For long haul coherent optical fiber communication systems, it is significant to precisely monitor the quality of transmission links and optical signals. The channel capacity beyond Shannon limit of Single-mode optical fiber (SMOF) is achieved with the he... see more

Pags. 253 - 276  

Nagham Ali Jasim,Balsam Saad Ismail

This paper aims to explore the extent to which the Iraqi industrial environment is keeping pace with technological progress. It also attempts to show the role of smart production in environmental sustainability. Using the case study methodology, this pape... see more

Pags. 277 - 284  

Ameer Musa Imran Alhseeni,Ali Abdulmohsin Abdulraeem Al-rubaye

The scale mixture of normal mixing with Rayleigh as representation of Laplace prior of ß has introduced by Flaih et al[1].We employed this new scale mixture for the adaptive lasso Binary regression. New hierarchical model is considering ,as well the Gibb... see more

Pags. 285 - 292  

Wathiq Abed,Qais Aish,Ahmmed Hamed

Rigorous fault analysis (FA) referring to fault detection its level is important for maintenances to simplify as well as improves performance. The purpose of this study was to present a technique for the electronic diagnosis of switch defects in regular m... see more

Pags. 293 - 300  

Samera Ibrahim Kadum Al-Addal

The principle of dynamic carpooling is in local real-time to send the "user-carpooler." If we choose to travel with standard vehicles, we can contact the service a few minutes before departure. The service then searches for the best driver to give the des... see more

Pags. 301 - 307  

Rysbek B. Baimakhan,Zhanar B. Kadirova,Assima A. Seinassinova,Aigerim R. Baimakhan,Gulzhan M. Baimakhanova

In the construction of new buildings and facilities although the requirements of construction laws, building codes are observed, the heeling process and the collapse of the urban high-rise buildings are continuing at different speeds. Unfortunately, the n... see more

Pags. 308 - 321  

Hatim A. Rashid,Omar Akrm Al-juboori,Ahmed Mohammed Raoof Mahjoob

The construction industry consider one of the most dynamic industries due to the unique features such as the change in the project site and condition. These features make the application of specifications and codes more difficult. Occupational Safety requ... see more

Pags. 322 - 335