ARTICLE
TITLE

Effect of Process Parameters on Yield of Biofuel Production from Waste Virgin Coconut Oil

SUMMARY

This research aimed to determine the influence of process parameters on yields of biofuel production by hydrocracking of waste virgin coconut oil using HZSM-5 zeolite catalyst and to determine statistical relationship of yields of biofuels with the parameters by Pearson’s correlation. The various operating parameters in batch reactor were a reaction temperature (350-400°C), an initial hydrogen pressure (20-40 bar), and a reaction time (1-3 h). The highest yields of gasoline (6.79 wt%) and kerosene (31.38 wt%) were achieved under a temperature at 400°C, initial hydrogen pressure at 40 bar, and a reaction time of 3 h. The highest yield of diesel of 58.62 wt% was achieved at a reaction time of 1 h under temperature 400°C and initial hydrogen pressure 40 bar. The experimental data were analyzed by input-output model with the coefficient of determination (R2) of yield prediction ranging from 0.86 to 0.92. The Pearson’s correlation coefficients show strong dependence of reaction temperature and time on hydrocarbon chains of various length. Yields of shorter hydrocarbon chains such as gasoline and kerosene required higher reaction temperature and longer reaction time and vice versa. Pressure dependence on yields of biofuels was insignificant.

 Articles related

Liudmyla P. Sukhovirska, Olha M. Lunhol, Oksana V. Zadorozhna, Polina H. Kovalenko    

The article is devoted to the research of the effectiveness of formation of students’ experimental competencies in hydrodynamics and hemodynamics at a medical university using the software "Heart-lung machine SORIN C5" [1]. On the basis of analysis of ps... see more


Ria Muliyana,Masthura Masthura,Abdul Halim Daulay    

Research on the effect of electric voltage on the electrocoagulation process in reducing levels of heavy metals in water. This study aims to determine the metal content Fe (Iron) and Mn (Manganese) dug well water by varying the electrical voltage of 3, 6... see more


Andre Sparta,Deni Emilda    

Acclimatization is one of the important processes in banana micro propagation before plantlets/planting materials are ready to be cultivated in the field. Trichoderma sp. are well known as plant promoter fungi that can promote plant growth and increase s... see more


Sobron Yamin Lubis,Sofyan Djamil,Yehezkiel Kurniawan Zebua    

In the machining of metal cutting, cutting tools are the main things that must be considered. Using improper cutting parameters can cause damage to the cutting tool. The damage is Built-Up Edge (BUE). The situation is undesirable in the metal cutting pro... see more


Yurii Gichov,Mykhailo Stupak    

This paper reports a technique of the pulsed resonant fuel combustion in the processes of drying and heating steel-casting ladles, devised to save fuel. The research method is based on the initiation of pulsations when burning fuel at a frequency equal t... see more