Home  /  Materials Science  /  Vol: 21 Núm: 4 Par: 0 (2015)  /  Article
ARTICLE
TITLE

Magnetic Properties of Two-Phase Composite Magnetic Material and Its Application to Electrical Equipment

SUMMARY

A detailed research on the magnetic properties, preparation, and application of two-phase composite magnetic material was conducted in this paper. Firstly, in order to obtain the characteristics of high remanence and low coercivity, a micro field mathematical model of hysteresis was established and the magnetization model of this material was determined on the basis of micro magnetic theory. Secondly, the relationship between remanence and coercivity was analyzed and the preparation technology of the material was proposed from the perspective of the elemental composition, the heat treatment, and the other steps. Finally, after mastering the magnetization characteristic, conversion and control mechanism of the material, a new power transformer with function of DC bias compensation based on the two-phase composite magnetic material was proposed. The simulation and experimental results showed that the transformer could achieve a good compensation for the DC bias problem by using material remanence, which provides intelligent and energy-saving electrical equipment for the electric network safe operation.DOI: http://dx.doi.org/10.5755/j01.ms.21.4.9707

 Articles related

Dignora de las Mercedes Dinza Verdecia,Ramón Arias Gilart,Carlos Eduardo Alfaro Rodríguez,Yadira Silveira Font,Roberto Orlando Menadier Gainza,Katia de la Caridad Soto Fernández    

En este trabajo se evaluó el comportamiento del  proceso de combustión de una mezcla diésel-aceite de Jatropha curcas al 10% bajo la acción de un campo magnético. La mezcla y el diésel empleados presentaron propiedades físico-químicas similares. Par... see more


Ethem Ilhan SAHIN, Selcuk PAKER, Mesut KARTAL    

In this study, terbium-doped NiFe2O4 was produced by using mixed oxide technique. The Ni1-xTbxFe2O4 composition was synthesized and x was selected as 0.025, 0.050 and 0.070, respectively. The single phase Ni ferrite was produced after sintering at 1250&n... see more


Fang YANG, Xing Xing YANG, Qing LIN, Rui Jun WANG, Hu YANG, Yun HE    

The paper reports the use the sol-gel auto-combustion method for the preparation of nanocrystalline La1-xSrxFeO3 (x = 0¸0.7). The physical and chemical properties, microstructure, morphology and magnetic properties of the particles thus formed were ... see more


Zhiying GUO, Juncai DONG, Yidong ZHAO, Dongliang CHEN    

Recent progress of the soft X-ray magnetic circular dichroism (XMCD) techniques and relevant applications at beamline 4B7B in Beijing Synchrotron Radiation Facility are reported here. The key progress of the XMCD techniques include i) improvements in the... see more


Thanida CHAROENSUK, Chitnarong SIRISATHITKUL, Upsorn BOONYANG, Pongsakorn JANTARATANA    

Manganese-bismuth (MnBi) mechanical alloys have been under development for novel permanent magnets without rare-earth elements. The ball-milling of bismuth (III) oxide and manganese powders in this work leads to soft magnetic MnBi alloys with rod-like Mn... see more