ARTICLE
TITLE

EFFICIENCY EVALUATION OF IMPLEMENTATION OF OPTIMIZATION METHODS OF OPERATION MODES OF THE "PLAST - GAS PIPELINE" SYSTEM BY THE METHODS OF MATHEMATICAL MODELING

SUMMARY

To date, Ukraine's mature gas fields, which are being developed in the gas regime, are at the final stage of development, which is characterized by a significant depletion of reservoir energy. The final stage of development requires solving complex problems related to watering wells, destruction of the reservoir, removal of formation water and mechanical impurities, increasing back pressure in the system, as well as the moral and physical wear and tear of industrial equipment. In the conditions of falling gas production, a significant part of the operating well stock is unstable, in the mode of unauthorized stops due to the accumulation of liquid at the bottom and insufficient gas velocities for removal to the surface, and also the accumulation of the liquid phase in the lowered places of the gas gathering system.Within the framework of the conducted studies, the gas dynamic models of the operation of the gas collection system of 3 oil/gas-condensate fields (OGCF) are created. A single model of the gas production system "reservoir - well - gas gathering system - inter-field gas pipeline - main facilities" is built. The current efficiency of the gas production, collection and transportation system is assessed. On the basis of model calculations, the current production capabilities of the wells are defined, as well as the "narrow" places of the system.It is established that the introduction of modern technologies for the operation of watered wells without optimizing the operation of the entire gas production system is irrational, since the liquid that is carried out from the wellbore will accumulate in the plumes and increase the back pressure level in the ground part. In conditions of increasing gas sampling, liquid flowlines can be taken out of the loops and deactivated the separation equipment.The feasibility of introducing methods for optimizing the operation modes of the gas production - gathering and transportation system is estimated, which allows choosing the optimal method for increasing the efficiency and reliability of its operation.For the first time in the Ukrainian gas industry, an integrated model of the field is created as a single chain of extraction, collection, preparation and transportation of natural gas, which can be adapted for the development and arrangement of both new and mature deposits.The main advantage of the application for the hydrocarbon production sector is the simulation of the processes, which makes it possible to evaluate the operating mode of the well in the safe zone while reducing the working pressure and introducing various intensification methods, and also to estimate the increase in hydrocarbon production. For the equipment of the ground infrastructure – "midstream" – the main advantage is a reduction in the time required to perform design calculations for gas pipelines, trains and pipelines for transporting multiphase media using public models.The creation and use of integrated models of gas fields gives an understanding of the integral picture of available resources and ensures an increase in the efficiency of field development management.The results of the calculation are clearly correlated with the actual data, which makes it possible to use the models constructed to obtain numerical results.

 Articles related

Ahmed Hassen Youssef, Engy Saeed Mohamed, Shereen Hamdy Abdel Latif    

When designing a statistical model, applied researchers strive to make the model consistent, unbiased, and efficient. Labor productivity is an important economic indicator that is closely linked to economic growth, competitiveness, and living standards w... see more


Yodprem Pookamnerd, Panuwat Thosa, Sittichai Charonerat, Suriya Prasomthong    

Friction stir welding (FSW) is a solid-state joining process used to weld dissimilar aluminum alloys with varying material properties and compositions. Unlike traditional welding methods, FSW does not involve melting the materials being welded but instea... see more


Thanh Quang Le, Thanh Hai Nguyen, Loc Huu Nguyen    

Ultrasonic welding is a welding method that has been applied for welding nonwoven fabrics, with many advantages such as fast speed, high reliability, easy automation and especially less pollution to the environment. This paper studies the optimization of... see more


Dong Van Pham    

In the machining process, it is difficult to solve problems due to the relationship between productivity and quality, for example, as the productivity increases, the quality of reprocessing may decrease. Some methods only address specific objectives, suc... see more


Mahammadali Nuraddin Nuriyev, Afet Mastan Jafarova    

Analysis of methods for determining the hardness of the winding shows that all existing methods require a lot of labor and time. When measuring the layer-by-layer hardness, the known methods do not allow obtaining continuous values, and in the case of me... see more