ARTICLE
TITLE

Hydraulic Analysis and Improvement of Water Distribution Networks of Dutse Metropolis, Nigeria

SUMMARY

In order to satisfy the water demand of the continuously growing population, it is essential to provide an adequate quantity of water through a well-designed network of pipes in Dutse Metropolis of Jigawa State, Nigeria. Insufficient network coverage in commensurate with the rapid infrastructural development and inadequate supply of water to Dutse Metropolis has, over the years, caused hardship to people in the town. Presently, the system produces a total of 1,801,728l/d against the current demand of 7,793,760 l/d indicating a gross deficiency of up to 76.9%. This study employed EPANET 2.0 to conduct hydraulic analysis of water distribution in Dutse Metropolis with a view to propose improvement measures. Results indicated that water coverage in the present network can only reach 70.45% of the town for only 2 hours at the desired pressure head. The water demand of the town was projected to 2026 and found to be 9,975,960 l/d. The network was re-designed to meet the future demands and results indicated that the new network can supply water for an extended period of 15 hours with 95% of the area having pressure head varying from 25-65 m and flow above the minimum recommended value of 0.3 l/s. The proposed pipe reticulation is estimated to cost N1,207,892,686.  The outcome of the study was recommended to the Government for strategic planning and implementation application.

 Articles related

Vincenzo Bagarello, Andrea De Santis, Giuseppe Giordano, Massimo Iovino    

Performing ponding infiltration runs with non-circular sources could represent a good means to sample completely an area of interest. Regardless of the shape of the source, predicting the expected reliability of the collected data by infiltrometers shoul... see more


A. G. Adeogun, M. A. Akinpelu, M. A. Yusuf, R. A. Animashaun    

In this study, selected culverts along Ilorin – Jebba road, Kwara State were hydraulically analyzed using HY-8 modelling tool. Hydrological analyses of the culverts were performed using rational method for the computation of design discharges.  On... see more


Meng Li    

Orienter working pressure for coiled tubing drilling (CTD) is associated with the randomness of torque. Thus, a new method for orienter pressure design was built based on uncertainty analysis theory. The Monte-Carlo method was applied to simulate the dis... see more


Muh. Darwis Isnaini,Surip Widodo,Muhammad Subekti    

ABSTRACT THE THERMAL-HYDRAULICS ANALYSIS ON RADIAL AND AXIAL POWER FLUCTUATION FOR AP1000 REACTOR. The reduction of fissile material during reactor operation affects reactivity reduction. Therefore, in order to keep the reactor operating at fixed power, ... see more

Revista: Tri Dasa Mega

Reinaldy Nazar    

Reactor TRIGA 2000 Bandung is result of upgrading TRIGA Mark II reactor from nominal power of 1 MW becomes 2 MW and has been opened its the operation in the year 2000. In this period change of operation parameters had been occurred, especially the parame... see more

Revista: Tri Dasa Mega