Articles related

Yaroslav Doroshenko,Ihor Rybitskyi    

CFD simulation investigated turbulent flows in equal gas pipeline tees, in which the gas flow completely moves from the main line to the branch. The study was performed for tees of different geometry – stamped with different bending radii of the transiti... see more


Nyoman Ade Satwika, Ridho Hantoro, Sarwono Sarwono, Gunawan Nugroho    

HAWT with three blades is often used, because it has the highest power coefficient among other turbines. The airfoil used is Clark-Y type because it has high glide ratio (coefficient lift/coefficient drag) in the application of subsonic flow. The main pu... see more


Nutthanun Keerlatiyadatanapat, Thanarath Sriveerakul, Nat Suvarnakuta, Kulachate Pianthong    

In this research, performance of a hybrid compressor and ejector refrigeration system for automotive air conditioning application was investigated theoretically and experimentally. Mathematical modeling integrated the 1-dimensional analysis of ejector wi... see more


Nazila Kardan, Habib Hakimzadeh, Yousef Hassanzadeh    

Scouring around cylinders is greatly affected by the value of bed shear stress entered on sediment materials of the bed. Regarding the importance of the bed shear stress fluctuations and their influence on the initiation and development of scouring aroun... see more


Jefrey I. Kindangen    

This article describes the results of a 2D numerical simulation by Computational Fluid Dynamics (CFD) of airflow distribution over all of building's storeys. Obstruction of a tall building with certain distances from the windward or the leeward side of a... see more