SUMMARY
To investigate the behaviour of composite action with various shear connectors, push-out tests were performed for eight specimens. Test parameters includes are type of shear connector (headed stud connector and channel connector), number of connectors (one and two) and specimen with or without decking sheet. Test results showed that performance of the push-out specimens depends greatly on type of connector and decking sheet. From the experimental study it was observed that the performance and shear capacity of channel connector was 60 % more than the stud connector. The shear resistance between the steel and concrete was enhanced up to 50 % for the push out specimen without decking. The specimen with two numbers of stud and channel connector increases the strength by 58% and 23% respectively as compared to specimen with single connector. The behaviour of the push out specimen was stimulated by three-dimensional finite element model using software ANSYS workbench. The analytical behaviour was well agreement with the real push out specimen studied experimentally.