ARTICLE
TITLE

ANALYSIS OF LATTICE PARAMETER, ERROR, AND THE BANDGAP ENERGY IN CADMIUM SULFIDE (CdS) SEMICONDUCTOR MATERIAL

SUMMARY

Has successfully analyzed the lattice parameter, error, and energy band gap of Cadmium Sulfide (CdS) material. CdS is a semiconductor material. In this study, the CdS used is a material with a cubic crystal structure using database from the International Center for Diffraction Data (ICDD), then the data is calculated using the Cramer-Cohen method. From these data the resulting lattice parameter of a = b = c = 5.823791777 Å with an average error of 0.00034%. The band gap energy calculation of CdS material is 2.477 eV.

PAGES
pp. 113 - 120

 Articles related

Valerij F. Bashev, Sergey I. Ryabtsev, Oleksandr I. Kushnerov, Nataliya A. Kutseva, Sergey N. Antropov    

By the method of quenching from the liquid state (splat-quenching), it is first revealed the formation of mixture of metastable supersaturated substitutional solid solutions in the eutectic alloy Be-33at.% Si. Cast samples are obtained by pouring melt in... see more


Rizalul Fiqry, Ariswan Ariswan, Heru Kuswanto    

AbstrakTelah dilakukan penumbuhan kristal bahan semikonduktor Cd(Se0,6Te0,4) dengan metode Bridgman. Penelitian ini bertujuan mengetahui komposisi kimia, parameter kisi, struktur kristal dan morfologi kristal bahan semikonduktor Cd(Se0,6Te0,4). Pemanasan... see more


Valentin Usov, Heinz-Günter Brokmeier, Nataliia Shkatulyak, Elena Savchuk, Norbert Schell    

Effect of deformation by extrusion, rolling after extrusion (in combination with annealing and changing the rolling direction), and subsequent alternating bending (AB) with the number of cycles 0.5, 1, 3, and 5 on the elastic modulus (E), damage accumula... see more


Volodymyr O. Kutovyi, Dmitry G. Malykhin, Olexandr S. Kalchenko, Ruslan L. Vasilenko, Volodymyr D. Virych, Olexandr O. Germanov    

A scientific and technical development of a high-performance thermal-vacuum method, which is an environmentally friendly process based on combination of vacuuming and high-speed thermal heating, was carried out with non-stop production of nanodispersed c... see more


Olga Maksakova, Alexander Pogrebnjak, Vyacheslav Beresnev, Vyacheslav Stolbovoy, Sónia Simo?s, Dosym Yerbolatuly    

The scientific interest in the investigation of nitride composites as protecting materials in tool and machining industries intensively increases. The good oxidation resistance of CrN single-layer films and high melting point, good chemical and thermal r... see more