ARTICLE
TITLE

Improvement of the Shielding Effectiveness of PMMA/MWCNTs/Ag Hybrid Composite for X-Band Application

SUMMARY

Herein, the PMMA/MWCNT/Ag hybrid composite films are prepared by solvent casting method to be used in an electrical application. The AC conductivity and dielectric characteristics have been investigated at room temperature. The electrical conductivity of the hybrid composite reaches a percolation critical concentration of 2.14×10-4 S/cm by Ag doping. For all PMMA/MWCNT/Ag hybrid composites, the frequency-dependent dielectric constant decreases as the frequency area widens. As the concentrations of MWCNT and Ag increase, the AC conductivity exhibits an increasing trend. The MWCNT and Ag content was found to significantly affect the SE of the given composites. A high electromagnetic (EM) shielding efficiency (SE) was achieved between 8.2 and 12.4 GHz (X-band). The highest EM attenuation of 18 dB at 12 GHz was achieved using 0.5 wt% MWCNT and Ag. The thermal analysis of the formed PMMA/MWCNT/Ag hybrid composites showed that exothermic reactions with the greatest weight loss took place between 200°C and 300°C. FESEM show that PMMA/MWCNT/Ag hybrid composites had  uniform dispersion of the  carbon  nano tube  and silver particles within the PMMA matrix .

 Articles related

Chil-Chyuan KUO, Teng-Sheng CHIANG    

Fresnel lenses are becoming more and more important because they are widely used as optical elements for concentrating solar power. Micro-hot embossing is a promising approach to fabricate Fresnel lenses. Precision optical elements must be more quickly a... see more


I. Rahmanian,Y. Wang    

Performance of gypsum board based systems in fire is highly influenced by the temperature-dependant thermal conductivity of gypsum boards, yet there is a wide difference in the thermal conductivity values used in literature. Presented here is a hybrid me... see more


Jipeng Shi, Yanbin Zhou and Liming Liu    

Laser-TIG (tungsten inert gas) hybrid welding process is applied to produce stable back beads in the first layer during one-side multilayer welding. To explain why stable back beads can be formed, a comparison is conducted between single TIG and laser-TI... see more

Revista: Applied Sciences

Maojun Cao, Yu Dai, Ling Zhao, Yuele Jia and Yueru Jia    

Combining the advantages of multicontinuum and multifracture representations provides an easy-to-use tool to adequately capture the characteristic of the multiscaled fracture system in shale gas reservoir. A hybrid model is established on the basis of si... see more

Revista: Energies

Antonino Bartolotta,Gaetano Di Marco,Mauro Federico,Giovanni Carini Jr.    

The versatile behaviour of poly-vinylbutyral (PVB) and its ability to form quasi-solid polymer electrolytes (SPE) with reliable ionic mobility, has been investigated over the temperature range from 120 K to 350 K, by mechanical and dielectric spectroscop... see more