Inelastic impact and the coefficient of restitution

  • Andreas Panayiotou Christoforou Kuwait University
  • Ahmet Salih Yigit Kuwait University
Keywords: contact, dynamics, coefficient of restitution, deformable spheres.

Abstract

A model for the impact between a structurally deformable sphere and a rigid flat surface is presented. It includes a nonlinear contact element that accounts for energy loss due to local plastic deformation or flattening of the sphere, a viscous element that accounts for energy loss due to wave propagation and/or damping, and a linear stiffness element that accounts for recoil effect during and after contact. A piece-wise linear version of the model is also presented, which facilitates normalization of the governing equations with helpful insights into the impact problem. It is demonstrated that the impact problem could be characterized by two non-dimensional parameters, namely the relative stiffness l, which accounts for recoil effect, plastic deformation and/or flattening of the ball, and the damping ratio, z, which accounts for viscous and/or wave propagation effects. It is shown that the impact response and the Coefficient of Restitution are dependent on both parameters. The model predictions are compared to experimental measurements for sports balls that are excellent examples of deformable spheres, with promising results.

References

Alsakarneh, A., Quinn, B., Kelly, G. & Barrett, J. 2012. Modelling and simulation of the coefficient of restitution of the sliotar in hurling. Sports Biomechanics 11(3): 342-357.

Callister, W.D. & Rethwisch, D.G. 2011. Materials Science and Engineering, eighth edition. John Wiley & Sons, Asia.

Christoforou, A.P. & Yigit, A.S. 1998. Effect of flexibility on low velocity impact response. Journal of Sound and Vibration 217: 563-578.

Christoforou, A.P. & Yigit, A.S. 2009. Scaling of low-velocity impact response in composite structures. Composite Structures 91: 358-365.

Christoforou, A.P., Yigit, A.S. & Majeed, M.A. 2013. Low-velocity impact response of structures with local plastic deformation: characterization and scaling. Journal of Computational Nonlinear Dynamics 8: 011012-1, 011012-10.

Cross, R. 1999. The bounce of a ball. American Journal of Physics 67(3): 222-227.

Goodwill, S.R., Kirk, R. & Haake, S.J. 2005. Experimental and finite element analysis of a tennis ball impact on a rigid surface. Sports Engineering 8: 145-158.

Doyle, F.J. 1989. Wave Propagation in Structures: An FFT-based Spectral Analysis Methodology. Springer-Verlag, New York.

Goldsmith, W. 1960. Impact. Edward Arnold, London.

Hanly, K., Collings, F., Cronin, K., Byrne, E., Moran, K. & Brabazon, D. 2012. Simulation of the impact response of a sliotar core with linear and nonlinear contact models. International Journal of Impact Engineering 50: 113-122.

Hunt, K.H. & Crossley, F.R.E. 1975. Coefficient of restitution interpreted as damping in vibroimpact. Journal of Applied Mechanics 42(2): 440-445.

Ismail, K.A. & Stronge, W.J. 2008. Calculated golf ball performance based on measured visco-hyperelastic material properties (P5). In: Estivalet M. & Brisson P. (Ed.). The Engineering of Sport 7-Vol 1. Pp. 11-18. Springer-Verlag, France.

Ismail, K.A. & Stronge, W.J. 2012. Viscoplastic analysis for direct impact of sports balls. International Journal of Nonlinear Mechanics 47: 16-21.

Johnson, K.L. 1985. Contact Mechanics. Cambridge University Press, Cambridge.

Nevins, D. & Smith, L. 2013. Influence of ball properties on simulated ball-to-head impacts. Procedia Engineering 60: 4-9.

Ranga, D. & Strangwood, M. 2010. Finite element modelling of the quasi-static and dynamic behavior of a solid sports ball based on component material properties. Procedia Engineering 2: 3287-3292.

Smith, L. & Burbank, S. 2013. Simulating sport ball impact through material characterization. Procedia Engineering 60: 73-78.

Stronge, W.J. 2000. Impact Mechanics. Cambridge University Press, Cambridge.

Stronge, W.J. & Ashcroft, A.D.C. 2007. Oblique impact of inflated balls at large deflections. International Journal of Impact Engineering 34: 1003-1019.

Weir, G. & Tallon, S. 2005. The coefficient of restitution for normal incident, low velocity particle impacts. Chemical Engineering Science 60: 3637-3647.

Yigit, A.S. & Christoforou, A.P. 1994. On the impact of a spherical indenter and an elastic-plastic transversely isotropic half-space. Composites Engineering 4(11): 1143-1152.

Yigit, A.S. & Christoforou, A.P. 2007. Limits of asymptotic solutions in low-velocity impact of composite plates. Composite Structures 81(4): 568-574.

Yigit, A.S., Christoforou, A.P. & Majeed, M.A. 2011. A nonlinear visco-elastoplastic impact model and the coefficient of restitution. Nonlinear Dynamics 66: 509-521.

Zener, C. & Feshbach, H. 1939. A method of calculating energy loses during impact. Journal of Applied Mechanics 61: A67-A70.

Published
2017-01-16
Section
Mechanical Engineering