Enhancement in Some Physical Properties of (PVP: CMC) Blend by the addition of MgO
Abstract
This research study explores the effects of adding MgO nanoparticles to a polymeric blend composed of 50% PVP and 50% CMC. The blend was prepared using MgO nanoparticles (0.2%, 4%, and 6%) and varying processing conditions. The structural, optical, and electrical properties of the resulting blend were analyzed to determine the impact of the added nanoparticles on the blend's properties. Results showed that the addition of nanoparticles significantly improved the structural, optical, and electrical properties of the polymeric blend. Specifically, the energy gap is 4.224 eV for (PVA: CMC) film and increased to 3.432 eV for (PVA: CMC-6% MgO), the light transmission and reflection properties were enhanced. Additionally, the conductivity of the blend was increased, making it suitable for various applications, including optoelectronics, sensors, and biomedical devices. Overall, this study demonstrates the potential of adding nanoparticles to polymeric blends to improve their properties and highlights the importance of optimizing processing conditions to achieve the desired properties for specific applications.
Downloads
References
M. Teodorescu, and M. Bercea, “Poly (vinylpyrrolidone)–a versatile polymer for biomedical and beyond medical applications,” Polymer-Plastics Technology and Engineering, 54(9), 923-943 (2015). https://doi.org/10.1080/03602559.2014.979506
P. Franco, and I. De Marco, “The Use of Poly (N-vinyl pyrrolidone) in the Delivery of Drugs: A Review.” Polymers, 12(5), 1114 (2020). https://doi.org/10.3390/polym12051114
S. Gono, Doctoral thesis, African University of Science and Technology, 2020. http://repository.aust.edu.ng/xmlui/handle/123456789/5007
M.I.H. Mondal, M.S. Yeasmin, and M.S. Rahman, “Preparation of food grade carboxymethyl cellulose from corn husk agrowaste,” International Journal of Biological Macromolecules, 79, 144-150 (2015). https://doi.org/10.1016/j.ijbiomac.2015.04.061
S.S.H. Al-Mgrs, M.H. Al-Timimi, M.Z. Abdullah, and W.H. Al-Banda, “Structural and optical characterizations of synthesized CMC/PVP-SnO2 nano composites.” AIP Conference Proceedings, 2475(1), 090018 (2023). https://doi.org/10.1063/5.0102768
A.B. Odunayo, F.I. Kayode, A.A. Benjamin, A.I. Adekola, and O.O. Ruth, “Evaluation of the binding property of some binders in metronidazole tablet formulation,” Int. J. Pharmacy. Chem. 7(2), 22-30 (2021). https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijpc.20210702.11.pdf
H.M. Hussein, and M.H. Al-Timimi, “Preparation and Study Some Physical Properties of (CMC/PAA: MgO) Nano Composites,” Eurasian Journal of Physics, Chemistry and Mathematics, 8, 47-55 (2022). https://www.geniusjournals.org/index.php/ejpcm/article/view/1944
A. Paria, and V.K. Rai, “The fate of carboxymethyl cellulose as a polymer of pharmaceutical importance,” Biological Sciences, 2(2), 204-215 (2022). https://doi.org/10.55006/biolsciences.2022.2204
S.S. Chiad, N.F. Habubi, S.F. Oboudi, and M.H. Abdul-Allah, “Effect of Thickness on The Optical Parameters of PVA: Ag,” Diyala Journal for Pure Sciences, 7, 153-161 (2011). https://www.iasj.net/iasj/pdf/4b03ea1b233568b1
M.S. Rahman, M.S. Hasan, A.S. Nitai, S. Nam, A.K. Karmakar, M.S. Ahsan, et al., “Recent developments of carboxymethyl cellulose,” Polymers, 13(8), 1345 (2021). https://doi.org/10.3390/polym13081345
A.H. Saputra, L. Qadhayna, and A.B. Pitaloka, “Synthesis and characterization of carboxymethyl cellulose (CMC) from water hyacinth using ethanol-isobutyl alcohol mixture as the solvents,” International Journal of Chemical Engineering and Applications, 5(1), 36 (2014). http://dx.doi.org/10.7763/IJCEA.2014.V5.347
H.M. Hussein, M.H. Al-Timimi, and Y.M. Jawad, “The Properties, Preparation and Applications for Carboxymethyl Cellulose (CMC) Polymer: A Review,” Diyala Journal for Pure Science, 18(4), (2022). https://djfps.uodiyala.edu.iq/index.php/Home/article/view/37/36
T. Franca, D. Goncalves, and C. Cena, “ATR-FTIR spectroscopy combined with machine learning for classification of PVA/PVP blends in low concentration,” Vibrational Spectroscopy, 120, 103378 (2022). https://doi.org/10.1016/j.vibspec.2022.103378
S.S.H. Almgrs, and M.H. Al-Timimi, “(CMC-PVP) Films Filled with SnO2 Nanoparticles Synthesized by (Solution-Gel) Method,” Journal of the college of basic education, 27(113), (2021). https://www.iasj.net/iasj/pdf/d05159f9f9bc79f1
A. Jalali, A. Shockravi, V. Vatanpour, and M. Hajibeygi, “Preparation and characterization of novel microporous ultrafiltration PES membranes using synthesized hydrophilic polysulfide-amide copolymer as an additive in the casting solution,” Microporous and Mesoporous Materials, 228, 1-13 (2016). https://doi.org/10.1016/j.micromeso.2016.03.024
G. Balakrishnan, R. Velavan, K.M. Batoo, and E.H. Raslan, “Microstructure, optical and photocatalytic properties of MgO nanoparticles,” Results in Physics, 16, 103013 (2020). https://doi.org/10.1016/j.rinp.2020.103013
F.R. Saeed, M.H.A.A. Al-Timimi, W.H.A. Al-Banda, M.Z. Abdullah, I. Stamatin, S. Voinea, et al., “Thermal Properties of Paraffin/Nano-Magnetitetrevorite Phase Change Materials,” Journal of Ovonic Research, 14(5). (2018). https://scholar.google.com/scholar?oi=bibs&cluster=14895011915883851214&btnI=1&hl=en
A.A. Mohammed, A.R. Ahmed, and M.H. Al-Timimi, Structural, “Optical and Thermal Properties of (PEG/PAA: MnO2) Nano Composites,” Technium BioChemMed, 3(2), 107-119 (2022). https://doi.org/10.47577/biochemmed.v3i2.7116
A. Khan, A. Naeem, T. Mahmood, B. Ahmad, Z. Ahmad, M. Farooq, and T. Saeed, “Mechanistic study on methyl orange and congo red adsorption onto polyvinyl pyrrolidone modified magnesium oxide,” Int. J. Environ. Sci. Technol. 19, 2515–2528 (2022). https://doi.org/10.1007/s13762-021-03308-z
M.Z. Abdullah, M.H. Al-Timimi, W.H. Albanda, M. Dumitru, A.E. Balan, C. Ceaus, et al., “Structural and Electrochemical Properties of P3-Na0. 67Mn0. 3Co0. 7O2 Nanostructures Prepared by Citric-Urea Self-Combustion Route as Cathode for Sodium Ion Battery,” Digest Journal of Nanomaterials and Biostructures, 14(4), 1179-1193 (2019). https://chalcogen.ro/1179_AbdullahMZ.pdf
S.S. Sainudeen, L.B. Asok, A. Varghese, A.S. Nair, and G. Krishnan, “Surfactant-driven direct synthesis of a hierarchical hollow MgO nanofiber–nanoparticle composite by electrospinning,” RSC advances, 7(56), 35160-35168 (2017). https://doi.org/10.1039/C7RA05812H
H.M. Ragab, “Optical, thermal and electrical characterization of PEO/CMC incorporated with ZnO/TiO2 NPs for advanced flexible optoelectronic technologies,” Ceramics International, 49(8), 12563-12569 (2023). https://doi.org/10.1016/j.ceramint.2022.12.118
A.J. Mawat, M.H. Al-Timimi, W.H. Albanda, and M.Z. Abdullah, “Morphological and optical properties of Mg1-xCdSx nanostructured thin films,” AIP Conference Proceedings, 2475(1), 090019 (2023). https://doi.org/10.1063/5.0103955
Y.M. Jawad, M.F.H. Al-Kadhemy, and J.A.S. Salman, “Synthesis structural and optical properties of CMC/MgO nanocomposites,” Materials Science Forum, 1039, 104-114 (2021). https://doi.org/10.4028/www.scientific.net/MSF.1039.104
M. Habeeb, and R.S.A. Hamza, “Synthesis of (Polymer blend-MgO) nanocomposites and studying electrical properties for piezoelectric application,” Indonesian Journal of Electrical Engineering and Informatics, 6(4), 428-435 (2018). http://dx.doi.org/10.52549/ijeei.v6i4.511
S.A. Salman, M.H. Abdu-allah, and N.A. Bakr, “Optical characterization of red methyl doped poly (vinyl alcohol) films,” International Journal of Engineering and Technical Research, 2(4), 126-128 (2014).
D.H. Wang, D.Y. Kim, K.W. Choi, J.H. Seo, S.H. Im, J.H. Park, et al., “Enhancement of donor–acceptor polymer bulk heterojunction solar cell power conversion efficiencies by addition of Au nanoparticles,” Angewandte Chemie, 123(24), 5633 5637 (2011). https://doi.org/10.1002/ange.201101021
S. Biswas, S.S. Panja, and S. Bose, “Tailored distribution of nanoparticles in bi-phasic polymeric blends as emerging materials for suppressing electromagnetic radiation: challenges and prospects,” Journal of Materials Chemistry C, 6(13), 3120-3142 (2018). https://doi.org/10.1039/C8TC00002F
J. Al-Zanganawee, M. Al-Timimi, A. Pantazi, O. Brincoveanu, C. Moise, R. Mesterca, et al., “Morphological and optical properties of functionalized SWCNTs: P3OT nanocomposite thin films, prepared by spincoating,” Journal of Ovonic Research, 12(4), 201-207 (2016). https://chalcogen.ro/201_AlzanganaweeJ.pdf
A.M. El-Naggar, Z.K. Heiba, A.M. Kamal, K.E. Alzahrani, O.H. Abd-Elkader, and M.B. Mohamed, “Impact of natural melanin doping on the structural, optical and dielectric characteristics of the PVP/CMC blend,” Journal of Taibah University for Science, 17(1), 2190731 (2023). https://doi.org/10.1080/16583655.2023.2190731
A.J. Kadham, D. Hassan, N. Mohammad, and A.H. Ah-Yasari, “Fabrication of (polymer blend-magnesium oxide) nanoparticle and studying their optical properties for optoelectronic applications,” Bulletin of Electrical Engineering and Informatics, 7(1), 28-34 (2018). https://doi.org/10.11591/eei.v7i1.839
A. Hashim, and M.A. Habeeb, “Synthesis and characterization of polymer blend-CoFe 2 O 4 nanoparticles as a humidity sensors for different temperatures,” Transactions on Electrical and Electronic Materials, 20, 107-112 (2019). https://doi.org/10.1007/s42341-018-0081-1
A.T. Abood, O.A.A. Hussein, M.H. Al-Timimi, M.Z. Abdullah, H.M.S. Al-Aani, and W.H. Albanda, “Structural and optical properties of nanocrystalline SnO2 thin films growth by electron beam evaporation,” AIP Conference Proceedings, 2213(1), 020036 (2020). https://doi.org/10.1063/5.0000454
M.H. Saeed, M.H. Al-Timimi, and O.A.A. Hussein, “Structural, morphological and optical characterization of nanocrystalline WO3 thin films,” Digest Journal of Nanomaterials and Biostructures, 16(2), 563-569 (2021). https://chalcogen.ro/563_SaeedMH.pdf
H.S. Al-Rikabi, M.H. Al-Timimi, A.H. Abed, and W. Albanda, “Surface Topography and Optical Properties for (MgOx-1ZnSx) Thin Films Prepared by Chemical Spray Pyrolysis,” Diyala Journal for Pure Science, 18(4), (2022). https://djfps.uodiyala.edu.iq/index.php/Home/article/view/36/35
N.S. Alghunaim, “Effect of CuO nanofiller on the spectroscopic properties, dielectric permittivity and dielectric modulus of CMC/PVP nanocomposites,” Journal of Materials Research and Technology, 8(4), 3596-3602 (2019). https://doi.org/10.1016/j.jmrt.2019.05.022
M.A. Morsi, R.A. Pashameah, K. Sharma, E. Alzahrani, M.O. Farea, and A.A. Al-Muntaser, “Hybrid MWCNTs/Ag nanofiller reinforced PVP/CMC blend-based polymer nanocomposites for multifunctional optoelectronic and nanodielectric applications,” Journal of Polymers and the Environment, 31(2), 664-676 (2023). https://doi.org/10.1007/s10924-022-02656-2
A. Hashim, F.L. Rashid, Z. Al-Ramadan, and M.H. Abdul-Allah, “Characterization of (PVA-BaSO4 5H2O) Composites,” Diyala Journal for Pure Science, 8, 296-302 (2012). https://www.iasj.net/iasj/pdf/a5577c17b8b8e701
S.S. Chiad, N.F. Habubi, S.F. Oboudi, and M.H. Abdul-Allah, “Effect of Thickness on The Optical Parameters of PVA: Ag” . Diyala Journal for Pure Sciences, 7, 153-161(2011). https://www.iasj.net/iasj/download/4b03ea1b233568b1
A.A. Al-Muntaser, R.A. Pashameah, E. Alzahrani, S.A. Al-Subhi, S.T. Hameed, and M.A. Morsi, “Graphene Nanoplatelets/TiO2 Hybrid Nanofiller Boosted PVA/CMC Blend Based High Performance Nanocomposites for Flexible Energy Storage Applications,” J. Polym. Environ. 31, 2534-2548 (2023). https://doi.org/10.1007/s10924-022-02748-z
S. El-Gamal, and A.M. El-Sayed, “Physical properties of the organic polymeric blend (PVA/PAM) modified with MgO nanofillers,” Journal of Composite Materials, 53(20), 2831-2847 (2019). https://doi.org/10.1177/0021998319840802
S.T. Hameed, T.F. Qahtan, A.M. Abdelghany, and A.H. Oraby, “Structural, optical, and dielectric characteristics of copper oxide nanoparticles loaded CMC/PEO matrix,” Journal of Materials Science, 57(15), 7556-7569 (2022). https://doi.org/10.1007/s10853-022-07134-7
Copyright (c) 2023 Widad H. Albanda, D.J. Fakralden, N.A. Hassan
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
