Research of influence of different shaped charge liner materials on penetration depth using numerical simulations

Alan Catovic

Abstract


Numerical simulations, using the Ansys AUTODYN program, of Panzerfaust 30 (klein) anti-tank warhead were performed to determine the influence of different liner materials on the penetration depth into a steel target. It has been shown that the choice of liner material can significantly affect the performance of the ammunition. Along with other methods of optimizing shaped charge ammunition (ie. optimization of the shape, thickness and angle of the tip of the liner, use of more potent explosive and deviator, optimization of casing thickness and stand-off distance, etc.), the use of appropriate liner material is certainly one of the most important parameters of shaped charge warheads to consider. Together with analytical calculations and experimental tests, simulations are valuable tool. Using data obtained from numerical simulations, researchers can save both time and resources during the process of munition design and optimization.

Keywords


shaped charge, HEAT warhead, Panzerfaust 30, liner material, penetration depth

Full Text:

PDF

References


W. P. Walters, J. A. Zukas, Fundamentals and Theory of Shaped Charges, John Wiley & Sons, New York, 1989.

J. Zukas, High velocity impact dynamics, Wiley Interscience, 1990.

J. Carleone, Tactical Missile Warheads, Progress in Astronautics and Aeronautics, Volume 155, AIAA, 1993.

J. A. Zukas, Introduction to Hydrocodes, Elsevier, 2004.

E. Gurel, Modeling and Simulation of Shaped Charge, Doctoral thesis, Middle East Technical University, 2009.

D. Fišerová, Numerical analyses of buried mine explosions with emphasis on effect of soil properties on loading, Doctoral thesis, Cranfield University, Defence College of Management and Technology, 2006.

C. Poole, Penetration of Shaped Charge, Doctoral thesis, Corpus Christi College, University of Oxford, 2005.

M. Held, "Liners for shaped charges", Journal of Battlefield Technology, Vol 4, No 3, November 2001.

C. Wang, J. Ding. H. Zhao, "Numerical simulation on jet formation of shaped charge with different liner materials", Defence Science Journal, Vol. 65, No 4, pp. 279-286, 2015.

T. A. E. Elshenawy, Criteria of design improvement of shaped charges used as oil well perforators, Doctoral thesis, University of Manchester, 2012.

W. Kulsirikasem, A. Julniphitwong, G. Tanapornraweekit, "Investigation of materials for liners of shaped charge warhead and their optimum standoff distances", The Second TSME International Conference on Mechanical Engineering, Krabi, 19-21 October, 2011.

S. Buc, Shaped Charge Liner Materials: resources, processes, properties, costs and applications, Advanced Research Projects Agency (ARPA), Technical report, SPC 91-282-2, 1991.

G. R. Johnson, W. H. Cook, "A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures", Proceedings 7th International Symposium on Ballistics, pp. 541-547, The Hague, 1983.

W. Walters, Introduction to shaped charges, ARL-SR-150, March, 2007.

L. Ding, W. Tang, X. Ran, "Simulation study on jet formability and damage characteristics of a low-density material liner", Materials, January, 2018.

W. T. Fu, Z. H. Rong, "Copper-tungsten shaped charge liner and its jet", Propellants, Explosives, Pyrotechnics, Vol. 21, No. 4, pp. 193-195, 1996.

B. Bourne, K. G. Cowan, J. P. Curtis, "Shaped charge warheads containing low melt energy metal liners", 19th International Ballistic Symposium, Interlaken, Switzerland, May 7-11, 2001.

W. Tie-Fu, Z. He-Rong, "Copper-Tungsten Shaped Charge Liner and its Jet", Propellants, Explosives, Pyrotechnics, Vol. 21, pp. 193- 196, 1996.

Z. Zhao, J. Liu, W. Guo, S. Li, G. Wang, "Effect of Zn and Ni added in W–Cu alloy on penetration performance and penetration mechanism of shaped charge liner", International Journal of Refractory Metals and Hard Materials, Vol. 54, pp. 90-97, 2016.

S. V. Fedorov, A. V. Babkin, S. V. Ladov, G. A. Shvetsov, A. D. Matrosov, "On the possibility of reducing the penetration capability of shaped-charge jets in a magnetic field", Journal of Applied Mechanics and Technical Physics, Vol. 48, No. 3, pp. 393-400, 2007.

W. Q. Guo, J. X. Liu, Y. Xiao, S. K. Li, Z. Y. Zhao, J. Cao, "Comparison of penetration performance and penetration mechanism of W-Cu shaped charge liner against three kinds of target: pure copper, carbon steel and Ti-6Al-4V alloy", International Journal of Refractory Metals & Hard Materials, Vol. 60, pp. 147-153, 2016.

N. D. Gerami, G. H. Liaghat, G. H. R. S. Moghadas, N. Khazraiyan, "Analysis of liner effect on shaped charge penetration into thick concrete targets", Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 39, No. 8, pp. 3189-3201, 2017.

K. Naeem, A. Hussain, S. Abbas, "A Review of Shaped Charge variables for its optimum performance", Engineering, Technology & Applied Science Research, Vol. 9, No. 6, pp. 4917-4924, 2019.

J. Xiao, X. Zhang, Z. Guo, H. Wang, "Enhanced damage effects of multi-layered concrete target produced by reactive materials liner", Propellants, Explosives, Pyrotechnics, Vol. 43, No. 9, pp. 851-851, 2018.

B. Zygmunt, Z. Wilk, "The research of shaped charges with powder liners for geological borehole perforation", Archives of Mining Sciences, Vol. 52, No. 1, pp. 121-133, 2007.

W. Walters, P. Peregino, R. Summers, D. Leidel, "A study of jets from unsintered-powder metal lined nonprecision small-caliber shaped charges", USA Army Ballistics Research Laboratory, Aberdeen Proving Ground, 2001.

B. Grove, "Theoretical considerations on the penetration of powdered metal jets", International Journal of Impact Engineering, Vol. 33, No. 1-12, pp. 316-325, 2006.

N. Duan, Y. Gao, J. Wang, W. Du, F. Wang, "The properties of the sintered copper powder liner", Journal of Wuhan University of Technology - Materials Science Edition, Vol. 29, No. 2, pp. 269-272, 2014.

Y. Wang, Q. Yu, Y. Zheng, H. Wang, "Formation and penetration of jets by shaped charges with reactive material liners", Propellants, Explosives, Pyrotechnics, Vol. 41, No. 4, pp. 618-622, 2016.

T. Majewski, A. Jackowski, "Use of graphene for shaped charge liner materials", Problems of Mechatronics Armament, Aviation, Safety Engineering, Vol. 9, No 3, pp. 15-28, 2018.

N. Santosh et al, "Improvement in performance of shaped charge using bimetallic liner", Explosion Shock Waves and High Strain Rate Phenomena, Materials Research Proceedings 13, pp. 141-148, 2019.

AUTODYN® - Explicit Software for Nonlinear Dynamics, Theory Manual - Revision 4.3, Century Dynamics Inc., 2005.

Ansys Autodyn Training Manual: Euler Solver, ANSYS Inc., 2009.

J. Tu, G. H. Yeoh, Ch. Liu, Computational Fluid Dynamics - A Practical Approach, Third Edition, Elsevier Ltd, 2018.

A. Elbeih, T. Elshenawy, S. Zeman, Z. Akstein, "Application of BCHMX in shaped charges against RHA targets compared to different nitramine explosives", Central European Journal of Energetic Materials, Vol 15, No 1, pp. 3-17, 2018.

T. Elshenawy, A. Elbeih, Q. M. Li, "Influence of target strength on the penetration depth of shaped charge jets into RHA targets", International Journal of Mechanical Sciences, Volume 136, pp. 234-242, February 2018.

E. E. El-Sayed, T. A. Elshenawy, M. A. Shaker, A. M. Riad, "Influence of different shaped charge parameters on jet penetration into metallic target", Journal of Physics: Conference Series 2299 012016, IOP Publishing, 2022.

T. J. Gander, Field Rocket Equipment of the German Army 1939-1945, Almark Publishing, 1972.

S. J. Zaloga, Panzerfaust vs Sherman - European Theater 1944-45, Osprey Publishing, 2019.

G. L. Rottman, Panzerfaust and Panzerschreck, Osprey Publishing, 2014.

S. V. Ivanov, Soldier on front No 60: Panzerfaust and Panzerschreck, ARS, 2010.

German explosive ordnance - projectiles and projectile fuzes, TM 9-1985-3, United States Government Printing Office, Washington, 1953.

W. Fleischer, Panzerfaust and other German infantry anti-tank weapons, Schifer Publishing, 1994.

C. Bishop, The Encyclopedia: Weapons of World war II, Barnes & Noble, 1998.

J. A. Zukas, Introduction to Hydrocodes, Elsevier, 2004.

B. M. Dobratz, P. C. Crawford, LLNL Explosives Handbook - Properties of Chemical Explosives and Explosive Simulants, January 31, 1985.

J. Carleone, Tactical Missile Warheads, Progress in Astronautics and Aeronautics, Volume 155, AIAA, 1993.

D. J. Steinberg, S. G. Cochran, M. W. Guinan, "A constitutive model for metals applicable at high-strain rate", J. Appl. Phys., Vol 51, No 3, March 1980.

G. E. Fairlie, "The Numerical Simulation of High Explosives using AUTODYN-2D & 3D", Explo '98, Institute of Explosive Engineers 4th Biannual Symposium, September 1998.

H. Seidler, Hitler's Anti-Tank Weapons 1939–1945 (Images of War), Pen and Sword Military, May 13, 2020.

https://www.techsteel.net/alloy/stainless-steel/21-6-9

https://www.thyssenkrupp-materials.co.uk/stainless-steel-304-14301.html

R. DiPersio, W. Jones, A. Merendino, J. Simon, Characteristics of jets from small caliber shaped charges with copper and aluminum liners, BRL Technical Report No. 1866, September, 1967.

H. O. Agu, The effect of 3D printed material properties on shaped charge liner performance, Dissertation thesis, Cranfield University, Defence and Security, 2019.

B. Bourne, K. G. Cowan, J. P. Curtis, "Shaped charge warheads containing low melt energy metal liners", 19th International symposium on Ballistics, 2001.

B. Zygmunt, Z. Wilk, "Formation of jets by shaped charges with metal powder liners", Propellants, Explosive, Pyrotechnics, Vol 33, No 6, pp. 482-487, 2008.

https://www.metal.com/

https://pubs.usgs.gov/periodicals/mcs2022/mcs2022-tantalum.pdf

https://tradingeconomics.com/commodity/molybden

https://web.evs.anl.gov/uranium/guide/ucompound/propertiesu/brochure.cfm

Depleted Uranium - Technical brief, United States Environmental Protection Agency, Office of Air and Radiation Washington, EPA-402-R-06-011, December 2006.

R. Xu, Li Chen, Jinhua Zhang, Hengbo Xiang, Qin Fang, "Penetration of an optimal depleted uranium liner of a shaped charge: A numerical simulation method", International Journal of Protective Structures, Volume 12, No 3, 2021.

B. E. Fuchs, Shaped charges having a porous tungsten liner-an experimental and theoretical study of metal compression, jet formation and penetration mechanics, Dissertation thesis, New Jersey Institute of Technology, 1997.

Selected Hugoniots, Prepared by Group GMX-6, Los Alamos Scientific Laboratory, University of California, May 1, 1969.




DOI: http://dx.doi.org/10.21533/pen.v11i3.3500

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Alan Catovic

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN: 2303-4521

Digital Object Identifier DOI: 10.21533/pen

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License