Influence of modification on descriptions of low-carbon steel of St1kp and wheeled KP-T
DOI:
https://doi.org/10.15802/stp2013/14522Keywords:
armature and wheeled steels, nonmetallics, multifunctional modifiers, mechanical properties, chemical compositionAbstract
Purpose. Establishment of influence of modification on chemical composition stabilizing, improvements of morphology and location of nonmetallics and increase of stability and level of mechanical properties of steels St1kp and KП-Т. Methodology. For the performance of the given goal the modern methods of researches are used: chemical and spectral; electron microscopy; metallography; determination of mechanical properties. Chemical composition of steels was determined on DSTU 2651-2006 and specifications U 35.2-23365425-600:2006. Findings. Influence of multifunction modifiers were set on chemical composition, forming of nonmetallics and mechanical properties in low-carbon steel of St1kp and wheeled KP-T. It is proved that multifunction modifiers diminish the amount of nonmetallics and improve their morphology, facilitate chemical composition stabilization and increase of mechanical properties level of probed steels. Originality. Possibility of chemical composition stabilization and mechanical properties, changes morphology of nonmetallics due to volume crystallization at modification were first proved. Practical value. Use of modifiers of different compositions at the enterprises of JSCo «ArselorMittal Krivoi Rog» and JSCo «INTERPAYP NTZ» at smelting of steels St1kp and KП-T allowed to promote mechanical descriptions, especially shock viscidity of the prepared wheels from steel KП-T at the average on 14 %. Two new modifiers of multifunction action for treatment low-carbon and wheeled steels were developed, the novelty of which was confirmed by the patents ofUkraine № 85254 and № 93684.
References
Vakulenko L.I., Anofriyev V.G. Povrezhdayemost pri ekspluatatsii katanykh zheleznodorozhnykh koles povyshennoy prochnosti [Defectiveness during exploitation of rolled railway extra-strong wheels]. Vіsnyk Dnіpropetrovskoho natsіonalnoho unіversitetu zalіznychnoho transportu іmenі akademіka V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2012, issue 40, pp. 231-234.
Polishko S.A., Markova I.A., Ivchenko T.I., Nosova T.V. Vliyaniye elementov na parametry mekhanicheskikh svoystv seriynoy i modifitsirovannoy stali St1kp [Influence of elements on the parameters of mechanical properties of serial and modified steel St1kp]. Metallurgiya i gornorudnaya promyshlennost − Metals and Mining Industry, 2012, no. 4, pp 73-75.
Golubtsov V.A. Teoriya i praktika vvedeniya dobavok v stal vne pechi [Theory and practice of introduction of additions in steel out of a stove]. Chelyabinsk, Kompaniya NPP Publ., 2006. 422 p.
Babachenko A.I., Litvinenko P.L., Kononenko A.A., Roslik A.V. Issledovaniye sostava i identifikatsiya nemetallicheskikh vklyucheniy, vyyavlyayemykh pri kontrole zheleznodorozhnykh koles [Research of composition and authentication of nonmetallics, exposed at control of railway wheels]. Metallurgiya i gornorudnaya promyshlennost − Metals and Mining Industry, 2011, no. 5, pp 45-48.
Muradyan L.A. Issledovaniye deystvuyushchikh usloviy ekspluatatsii i analiz prichin sokrashcheniya resursa raboty zheleznodorozhnykh koles [Research of effective operating conditions and analysis of resource reduction reasons of railway wheels work]. Vіsnyk Dnіpropetrovskoho natsіonalnoho unіversitetu zalіznychnoho transportu іmenі akademіka V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2010, issue 34, pp. 206-210.
Myamlin S.V. Vliyaniye usloviy ekspluatatsii na vnutrenneye stroyeniye metalla zheleznodorozhnykh koles [Effect of operating conditions on the internal metal structure of the railroad wheels]. Vіsnyk Dnіpropetrovskoho natsіonalnoho unіversitetu zalіznychnoho transportu іmenі akademіka V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2012, issue 42, pp. 164-166.
Shapovalova O.M, Shapovalov V.P., Shapovalov O.V., Polіshko S.O. Rozkysliuvach-modyfіkator dlia obrobky rozplavіv stalei і splavіv [Deoxidizer-modifier for treatment of steels and alloys fusions]. Patent UA, no. a 20080112493684, 2011.
Shapovalova O.M, Shapovalov V.P., Shapovalov O.V., Polіshko S.O. Kompozytsіinyi rozkysliuvach dlia obrobky stalei [A composition deoxidizer for treatment of steels]. Patent UA, no. a 2007 00858, 2009.
Ryabchikov I.V. Modifikatory i tekhnologii vnepechnoy obrabotki zhelezouglerodistykh splavov [Modifiers and technologies of ladle treatment of iron-carbon alloys]. Moscow, Ekomet Publ., 2008. 400 p.
Shapovalova O.M., Kamyshnyy A.Ye., Shapovalov A.V., Polishko S.A., Kushnir M.A., Maystrenko Ye.N., Findling Yu.A. Stabilizatsiya khimicheskogo sostava i mekhanicheskikh svoystv v stalyakh 1kp i R7 pod vliyaniyem modifitsirovaniya [Stabilizing of chemical composition and mechanical properties in steels 1кp and R7 under influence of modification]. Stroitelstvo, materialovedeniye, mashinostroyeniye [Building, Material Science, Mechanical Engineering], 2009, issue 48, part 3, pp. 232-236.
Mirsado O., Milenko R., Omer B., Salejman M. Alloys with modified characteristics. Materials in Technologies, 2011, no. 5, pp. 485-489.
Lin K.P., Dun X.H., Hai J.P., Hin H.S. Effects of modification on microstructure and ultrahigh carbon (1.9wt%C) steel. Mater Science and Engineering A, 2011, vol. 528, no. 28, pp. 8263-8268
Fandrich R., Lunngen H., Wuppermann C.-D. Secondary metallurgy – state of the art and research trends in Germany. Stahl und Eisen, 2008, no. 2, pp. 50-53.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 S. Polishko, M. Kushnir, J. Tatarko, A. Sanin
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
