Impact of Flax Fiber Reinforcement on Mechanical Properties of Solid and Foamed Geopolymer Concrete

Authors

  • Kinga Korniejenko Institute of Material Engineering, Faculty of Material Engineering and Physics, Cracow University of Technology, Cracow, Poland
  • Michał Łach Institute of Material Engineering, Faculty of Material Engineering and Physics, Cracow University of Technology, Cracow, Poland
  • Maria Hebdowska-Krupa Institute of Material Engineering, Faculty of Material Engineering and Physics, Cracow University of Technology, Cracow, Poland
  • Janusz Mikuła Institute of Material Engineering, Faculty of Material Engineering and Physics, Cracow University of Technology, Cracow, Poland

DOI:

https://doi.org/10.46604/aiti.2021.5294

Keywords:

geopolymer, mechanical properties, foamed material, flax fiber

Abstract

The main objective of this study is to develop the advanced composites for civil engineering applications as material for the building industry, especially for an insulation purpose. The research processes include several steps. Firstly, the prototype elements, such as bricks and elevation elements were performed from eco-friendly composite -flax fiber reinforced geopolymer. The elements were designed to take into consideration for environment. Geopolymers are environmentally friendly, sustainable, and resource efficient, including energy demand. Next, the wall was built from these elements and exposed during the three months in a relevant environment. The main conclusion of the research is that the kind of fibers is important for the mechanical properties of the composite, including the fact that for those different fibers could be more beneficial for different raw materials, giving higher strength properties. The significant influence on the mechanical properties of the composites has the adhesion between fiber and material used as a matrix. The adhesion depends among others on the previous treatment of the fibers.

References

K. Korniejenko, E. Frączek, E. Pytlak, and M. Adamski, “Mechanical Properties of Geopolymer Composites Reinforced with Natural Fibers,” Procedia Engineering, vol. 151, pp. 388-393, August 2016.

K. Korniejenko, M. Łach, N. Doğan-Sağlamtimur, G. Furtos, and J. Mikuła, “Fibre Reinforced Geopolymer Composites - A Review,” 1st International Conference on Environment, Technology and Management (ICETEM), June 2019, pp. 3-13.

K. Korniejenko, “The Influence of Short Fibres on the Properties of Composites with Geopolymer Matrix,” (in Polish) Ph.D. dissertation, Faculty of Mechanical Engineering, Cracow University of Technology, Cracow, Poland, 2018.

R. M. Novais, J. Carvalheiras, M. P. Seabra, R. C. Pullar, and J. A. Labrincha, “Innovative Application for Bauxite Residue: Red Mud-Based Inorganic Polymer Spheres as pH Regulator,” Journal of Hazardous Materials, vol. 358, pp. 69-81, September 2018.

R. M. Novais, G. Ascensão, N. Ferreira, M. P. Seabra, and J. A. Labrincha, “Influence of Water and Aluminum Powder Content on the Properties of Waste-Containing Geopolymer Foams,” Ceramics International, vol. 44, no. 6, pp. 6242-6249, April 2018.

R. A. Sá Ribeiro, M. G. Sá Ribeiro, and W. M. Kriven, “A Review of Particle and Fiber-Reinforced Metakaolin-Based Geopolymer Composites,” Journal of Ceramics Science and Technology, vol. 8, no. 3, pp. 307-322, August 2017.

G. Furtos, L. Silaghi-Dumitrescu, P. Pascuta, C. Sarosi, and K. Korniejenko, “Mechanical Properties of Wood Fiber Reinforced Geopolymer Composites with Sand Addition,” Journal of Natural Fibers, vol. 1, pp. 1-12, June 2019.

A. R. Sakulich, “Reinforced Geopolymer Composites for Enhanced Material Greenness and Durability,” Sustainable Cities and Society, vol. 1, no. 4, pp. 195-210, December 2011.

R. Chen, S. Ahmari, and L. Zhang, “Utilization of Sweet Sorghum Fiber to Reinforce Fly Ash-Based Geopolymer,” Journal of Material Science, vol. 49, no. 6, pp. 2548-2558, December 2013.

T. Lin, D. Jia, P. He, and M. Wang, “In Situ Crack Growth Observation and Fracture Behavior of Short Carbon Fiber Reinforced Geopolymer Matrix Composites,” Materials Science and Engineering: A, vol. 527, no. 9, pp. 2404-2407, April 2010.

L. Yan, B. Kasal, and L. Huang, “A Review of Recent Research on the Use of Cellulosic Fibres, Their Fibre Fabric Reinforced Cementitious, Geo-Polymer and Polymer Composites in Civil Engineering,” Composites Part B: Engineering, vol. 92, pp. 94-132, May 2016.

A. M. Rashad, “A Synopsis about the Effect of Basalt and Natural Fibers on Geopolymer Properties,” Natural Resources Conservation and Research, vol. 1, pp. 1-9, 2018.

G. Silva, S. Kim, R. Aguilar, and J. Nakamatsu, “Natural Fibers as Reinforcement Additives for Geopolymers-A Review of Potential Eco-Friendly Applications to the Construction Industry,” Sustainable Materials and Technologies, vol. 23, e00132, April 2020.

H. Assaedi, F. U. A. Shaikh, and I. M. Low, “Effect of Nanoclay on Durability and Mechanical Properties of Flax Fabric Reinforced Geopolymer Composites,” Journal of Asian Ceramic Societies, vol. 5, no. 1, pp. 62-70, March 2017.

T. Alomayri, F. U. A. Shaikh, and I. M. Low, “Thermal and Mechanical Properties of Cotton Fabric-Reinforced Geopolymer Composites,” Journal of Material Science, vol. 48, no. 19, pp. 6746-6752, June 2013.

F. Pacheco-Torgal and S. Jalali, “Cementitious Building Materials Reinforced with Vegetable Fibers: A Review,” Construction and Building Materials, vol. 25, no. 2, pp. 575-582, February 2011.

K. Korniejenko, M. Łach, M. Hebdowska-Krupa, and J. Mikuła, “The Mechanical Properties of Flax and Hemp Fibres Reinforced Geopolymer Composites,” IOP Conference Series: Materials Science and Engineering, vol. 379, 012023, May 2018.

M. Alzeer and K. MacKenzie, “Synthesis and Mechanical Properties of Novel Composites of Inorganic Polymers (Geopolymers) with Unidirectional Natural Flax Fibres (Phormium Tenax),” Applied Clay Science, vol. 75-76, pp. 148-152, May 2013.

H. Assaedi, T. Alomayri, F. U. A. Shaikh, and I. M. Low, “Synthesis and Mechanical Properties of Flax Fabric Reinforced Geopolymer Composites,” Advances in Materials Research, vol. 3, no. 3, pp. 151-161, October 2014.

H. Assaedi, T. Alomayri, F. U. A. Shaikh, and I. M. Low, “Characterisation of Mechanical and Thermal Properties in Flax Fabric Reinforced Geopolymer Composites,” Journal of Advanced Ceramics, vol. 4, no. 4, pp. 272-281, 2015.

H. Assaedi, F. U. A. Shaikh, and I. M. Low, “Characterizations of Flax Fabric Reinforced Nanoclay-Geopolymer Composites,” Composites Part B: Engineering, vol. 95, pp. 412-422, June 2016.

H. Assaedi, F. U. A. Shaikh, and I. M. Low, “Effect of Nanoclay on Durability and Mechanical Properties of Flax Fabric Reinforced Geopolymer Composites,” Journal of Asian Ceramic Societies, vol. 5, no. 1, pp. 62-70, March 2017.

G. Silva, S. Kim, A. Castañeda, R. Donayre, J. Nakamatsu, R. Aguilar, et al., “A Comparative Study of Linen (Flax) Fibers as Reinforcement of Fly Ash and Clay Brick Powder Based Geopolymers,” IOP Conference Series: Materials Science and Engineering, vol. 416, 012107, 2018.

K. Korniejenko, M. Łach, S. Y. Chou, W. T. Lin, J. Mikuła, D. Mierzwiński, et al., “A Comparative Study of Mechanical Properties of Fly Ash-Based Geopolymer Made by Casted and 3D Printing Methods,” IOP Conference Series: Materials Science and Engineering, vol. 660, 012005, 2019.

K. Korniejenko, M. Łach, S. Y. Chou, W. T. Lin, A. Cheng, M. Hebdowska-Krupa, et al., “Mechanical Properties of Short Fiber-Reinforced Geopolymers Made by Casted and 3D Printing Methods: A Comparative Study,” Materials, vol. 13, no. 3, 579, January 2020.

K. Korniejenko and M. Łach, “Geopolymers Reinforced by Short and Long Fibres – Innovative Materials for Additive Manufacturing,” Current Opinion in Chemical Engineering, vol. 28, pp. 167-172. June 2020.

J. H. Lee, S. Wattanasiriwech, and D. Wattanasiriwech, “Preparation of Carbon Fiber Reinforced Metakaolin Based-Geopolymer Foams,” Key Engineering Materials, vol. 766, pp. 19-27, April 2018.

R. Krzywoń, J. Hulimka, A. Jędrzejewska, and M. Górski, “Application of Fibre Composite Grids as Reinforcement of Foamed PC and GP Concrete,” MATEC Web of Conferences, vol. 274, 05002, 2019.

R. M. Novais, R. C. Pullar, and J. A. Labrincha, “Geopolymer Foams: An Overview of Recent Advancements,” Progress in Materials Science, vol. 109, 100621, April 2020.

L. Senff, R. M. Novais, J. Carvalheiras, and J. A. Labrincha, “Eco-Friendly Approach to Enhance the Mechanical Performance of Geopolymer Foams: Using Glass Fibre Waste Coming from Wind Blade Production,” Construction and Building Materials, vol. 239, 117805, April 2020.

E. A. Correia, S. M. Torres, M. E. O. Alexandre, K. C. Gomes, N. P. Barbosa, and S. D. E. Barros, “Mechanical Performance of Natural Fibers Reinforced Geopolymer Composites,” Materials Science Forum, vol. 758, pp. 139-45, June 2013.

B. Galzerano, A. Formisano, M. Durante, F. Iucolano, D. Caputo, and B. Liguori, “Hemp Reinforcement in Lightweight Geopolymers,” Journal of Composite Materials, vol. 52, no. 17, pp. 2313-2320, November 2017.

J. P. S. Ngo and M. A. B Promentilla, “Development of Abaca Fiber-Reinforced Foamed Fly Ash Geopolymer,” MATEC Web of Conferences, vol. 156, 05018, March 2018.

M. Szechyńska-Hebda, J. Marczyk, C. Ziejewska, N. Hordyńska, J. Mikuła, and M. Hebda, “Optimal Design of pH-Neutral Geopolymer Foams for their Use in Ecological Plant Cultivation Systems,” Materials, vol. 12, no. 18, 2999, September 2019.

M. Szechyńska-Hebda, J. Marczyk, C. Ziejewska, N. Hordyńska, J. Mikuła, and M Hebda, “Neutral Geopolymer Foams Reinforced with Cellulose Studied with the FTRaman Spectroscopy,” IOP Conference Series: Materials Science and Engineering, vol. 706, no. 1, 012017, November 2019.

G. Silva, J. Salirrosas, G. Ruiz, S. Kim, J. Nakamatsu, and R. Aguilar, “Evaluation of Fire, High-Temperature and Water Erosion Resistance of Fiber-Reinforced Lightweight Pozzolana-Based Geopolymer Mortars,” IOP Conference Series: Materials Science and Engineering, vol. 706, no. 1, 012016, November 2019.

V. S. Le, P. Hájková, V. Kovacic, T. Bakalova, V. Lukáš, C. H. Le, et al., “Thermal Conductivity of Reinforced Geopolymer Foams,” Ceramics-Silikáty, vol. 63, no. 4, pp. 365-373, 2019.

M. Frydrych, Š. Hýsek, L. Fridrichová, V. S. Le, M. Herclík, M. Pechociaková, et al., “Impact of Flax and Basalt Fibre Reinforcement on Selected Properties of Geopolymer Composites,” Sustainability, vol. 12, no. 1, 118, 2020.

R. V. Upadhyaya and T. G. Suntharavadivel, “Optimization of Flyash and Metakaolin Content in Mineral Based CFRP Retrofit for Improved Sustainability,” International Journal of Engineering and Technology Innovation, vol. 9, no. 3, pp. 171-181, July 2019.

N. Ranjbar and M. Zhang, “Fiber-Reinforced Geopolymer Composites: A Review,” Cement and Concrete Composites, vol. 107, 103498, March 2020.

G. Bumanis, L. Vitola, I. Pundiene, M. Sinka, and D. Bajare, “Gypsum, Geopolymers, and Starch-Alternative Binders for Bio-Based Building Materials: A Review and Life-Cycle Assessment,” Sustainability, vol. 12, no. 14, 5666, 2020.

K. Korniejenko, N. P. Halyag, and G. Mucsi, “Fly Ash as a Raw Material for Geopolymerisation - Chemical Composition and Physical Properties,” IOP Conference Series: Materials Science and Engineering, vol. 706, no. 1, 012002, November 2019.

K. Korniejenko, M. Łach, J. Marczyk, C. Ziejewska, N. P. Halyag, and G. Mucsi, “Fly Ash as a Raw Material for Geopolymerisation-Mineralogical Composition and Morphology,” IOP Conference Series: Materials Science and Engineering, vol. 706, no. 1, 012006, November 2019.

M. Łach, J. Mikuła, W. T. Lin, P. Bazan, B. Figiela, K. Korniejenko, “Development and Characterization of Thermal Insulation Geopolymer Foams Based on Fly Ash,” Proceedings of Engineering and Technology Innovation, vol. 16, pp. 23-29, August 2020.

Downloads

Published

2021-01-01

How to Cite

[1]
K. Korniejenko, Michał Łach, Maria Hebdowska-Krupa, and Janusz Mikuła, “Impact of Flax Fiber Reinforcement on Mechanical Properties of Solid and Foamed Geopolymer Concrete”, Adv. technol. innov., vol. 6, no. 1, pp. 11–20, Jan. 2021.

Issue

Section

Articles