Evaluation of the influence of the catalysts application on the level of emissions of carbon monoxide in the manufacture of electrodes

Authors

DOI:

https://doi.org/10.15587/2706-5448.2020.207483

Keywords:

carbon monoxide, flue gases, carbon material, manganese dioxide, atmospheric air, neutralization, production modernization, reduction of emissions.

Abstract

The object of research is emissions harmful to the environment by the example of emissions from the manufacturer of electrodes of Ukrgrafit JSC (Zaporizhzhia, Ukraine). As well as carbon material, during the heat treatment of which the formation of carbon monoxide occurs, taking into account the use of the catalyst directly in the technological process of heat treatment of carbon material. Based on the simulation of dispersion of emissions of Ukrgrafit JSC in the air, taking into account the size of the sanitary protection zone, it is shown that the CO surface concentration, taking into account background pollution, exceeds the maximum permissible concentration (MPC) at control points. It is determined that in order to achieve the established standards at the border of residential development, it is necessary to modernize production by introducing scientific and technical solutions to protect the atmosphere from pollution by carbon monoxide. Physical modeling of the processes of heat treatment of carbon materials for the production of electrodes, such as bedding, granular pitch, charge for billets, in a laboratory setup is carried out. The thermal regime is evaluated for the level of carbon monoxide emissions during firing of carbon material. The results are compared with the data obtained by examining the parameters of the furnaces in the enterprise.

The efficiency of using the catalyst directly in the technological process of heat treatment of carbon material to the efficiency of the oxidation of carbon monoxide is determined. It is established that a successful solution to the problem of exceeding the standard of carbon monoxide emissions in the technology for the production of electrodes is possible by using overfill modified with manganese dioxide with a MnO2 content of 1.5 %.

It is shown that after the catalytic neutralization of carbon monoxide, the maximum CO surface concentration on the boundaries of housing taking into account background pollution does not exceed the maximum permissible concentration. This ensures that 0.576638 MPC is obtained from the value of the maximum one-time maximum permissible concentration of carbon monoxide, minimizes the environmental risks from the company's emissions for the population. Modernization of production by introducing a system of catalytic neutralization of carbon monoxide does not require special equipment, compared with well-known analogues it does not require significant investment.

Author Biographies

Olena Ivanenko, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremohy ave., Kyiv, Ukraine, 03056

PhD, Associate Professor

Department of Ecology and Technology of Plant Polymers

Nikolai Gomelya, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremohy ave., Kyiv, Ukraine, 03056

Doctor of Technical Sciences, Professor, Head of Department

Department of Ecology and Technology of Plant Polymers

Yevgen Panov, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremohy ave., Kyiv, Ukraine, 03056

Doctor of Technical Sciences, Professor

Department of Chemical, Polymeric and Silicate Mechanical Engineering

References

  1. Ivanenko, O. I., Nosachova, Yu. V., Overchenko, T. A., Nakonechna, M. V., (2020). Features of the use of catalysts of various types in the processes of neutralization of carbon monoxide of flue gases. Bulletin of NTUU «Igor Sikorsky Kyiv Polytechnic Institute», Chemical engineering, ecology and resource saving, 1 (19), 22–42.
  2. Environmental passport of Zaporizhzhia region for 2018 (2019). Official portal of the Ministry of Energy and Environmental Protection of Ukraine, 173. Available at: https://menr.gov.ua/news/33529.html
  3. Kozhemyakin, G. B., Belokon, K. V., Rumyantsev, V. R. (2011). Strategiya obespecheniya kachestva vozdukha v Yevropeyskom Soyuze i Ukraine. Okhorona naukolyshnoho seredovyshcha promyslovykh rehioniv yak umova staloho rozvytku Ukrayiny, 10–13.
  4. Kutuzov, S. V., Buryak, V. V., Churilin, V. I., Panov, E. N., Shilovich, I. L., Gomelia, N. D., Leleka, S. V. (2012). Ekologicheskiye aspekty raboty pechey obzhiga elektrodnoy produktsii. Cvetnye metally-2012, 943–947. Available at: http://www.issp.ac.ru/ebooks/conf/Non-Ferrous_Metals-2012_ru.pdf
  5. Vinogradov, S. S., Vasilieva, I. A. (2007). Vybor oborudovaniya dlya ochistki mnogokomponentnykh i geterogennykh vybrosov. Industrial Ecology, 3, 14–17.
  6. Karvatskyi, A. Ya., Shylovych, I. L., Krutous, L. V., Kutuzov, S. V., (2013). Decrease of CO concentration using installation for carbon mono oxide convesion. Eastern-European Journal of Enterprise Technologies, 2 (11 (62)), 38–41. Available at: http://journals.uran.ua/eejet/article/view/11730
  7. Patel, D. M., Kodgire, P., Dwivedi, A. H. (2020). Low temperature oxidation of carbon monoxide for heat recuperation: A green approach for energy production and a catalytic review. Journal of Cleaner Production, 245, 118838. doi: http://doi.org/10.1016/j.jclepro.2019.118838
  8. Pavlovich, L. B., Ismagilov, Z. R., (2017). Razrabotka katalizatorov ochistki toksichnykh vybrosov na osnove otval'nykh shlakov chernoy metallurgii. Bulletin «Ferrous metallurgy», 11, 90–97.
  9. Pavlovich, L. B., Dyatlova, K. A., (2017). Katalizatory ochistki gazov ot uglevodorodov i oksida ugleroda. Bulletin of the Siberian State Industrial University, 2 (20), 50–53.
  10. Sanin, V. N., Andreev, D. E., Pugacheva, E. V., Zhuk, S. Ya., Borsch, V. N., Yukhvid, V. I., (2009). Polucheniye intermetallicheskikh katalizatorov glubokogo okisleniya CO i uglevodorodov. Inorganic Materials, 45 (7), 839–846.
  11. Borsch, V. N., Pugacheva, E. V., Zhuk, S. Ya., Andreev, D. E., Sanin, V. N., Yukhvid, V. I. (2008). Mnogokomponentnyye metallicheskiye katalizatory glubokogo okisleniya CO i uglevodorodov. Doklady Akademii Nauk, 419 (6), 775–777.
  12. Aryanin, A. G., Prokhorov, V. A. (1991). Razrabotka skhemy gazoochistnykh ustroystv pechey obzhiga uglerodnykh zagotovok. Universitiesʹ Proceedings. Nonferrous Metallurgy, 10, 43–46.
  13. Prokhorov, V. A., Aryanin, A. G. (1991). Obsledovaniye potokov otkhodyashchego gaza ot pechey obzhiga uglerodnykh zagotovok. Universitiesʹ Proceedings. Nonferrous Metallurgy, 10, 40–43.
  14. Buyanov, R. A., Afanasyev, A. D. (1975). Vliyaniye koksovykh otlozheniy na fazovyye perekhody oksida alyuminiya. Kinetics and Catalysis, 16 (3), 802–803.
  15. Radovenchik, V. M., Ivanenko, O. I., Radovenchik, Y. V., Krisenko, T. V. (2020). Zastosuvannya feritnih materіalіv v procesah ochishchennya vodi. Bila Tserkva: O. V. Pshonkivsky, 215.
  16. Lou, J.-C., Chang, C.-K. (2006). Catalytic Oxidation of CO Over a Catalyst Produced in the Ferrite Process. Environmental Engineering Science, 23 (6), 1024–1032. doi: http://doi.org/10.1089/ees.2006.23.1024
  17. Kharisov, B. I., Dias, H. V. R., Kharissova, O. V. (2019). Mini-review: Ferrite nanoparticles in the catalysis. Arabian Journal of Chemistry, 12 (7), 1234–1246. doi: http://doi.org/10.1016/j.arabjc.2014.10.049
  18. Karvackiy, A. Ya., Leleka, S. V., Pulinec, I. V., Lazarev, T. V. (2011). Development of burning regulations take into account the dynamics of gas emission of burning blanks. Eastern-European Journal of Enterprise Technologies, 6 (5 (54)), 42–45. Available at: http://journals.uran.ua/eejet/article/view/2281
  19. Belokon, K. V. (2015). Greening of electrode production enterprises by catalytic gas emissions disposal. Bulletin of KNAHU, 70, 42–49.
  20. Belokon, K. V., Belokon, Y. A., Kozhemyakin, G. B., Matukhno, E. V. (2016). Еnvironmental assessment of the intermetallic catalysts utilization efficiency for deactivation of the pollutants emitted by electrode production enterprises. Naukovyi Visnyk NHU, 3, 87–94. Available at: http://nbuv.gov.ua/UJRN/Nvngu_2016_3_16
  21. Panov, Y., Gomelia, N., Ivanenko, O., Vahin, A., Leleka, S. (2020). Assessment of the Effect of Oxygen and Carbon Dioxide Concentrations on Gas Evolution During Heat Treatment of Thermoanthracite Carbon Material. Journal of Ecological Engineering, 21 (2), 139–149. doi: http://doi.org/10.12911/22998993/116326
  22. Panov, E. N., Shilovich, I. L., Ivanenko, E. I., Buryak, V. V. (2012). Thermal and chemical aspects of formation CO in the process of baking of electrodes. Eastern-European Journal of Enterprise Technologies, 4 (6 (58)), 15–18. Available at: http://journals.uran.ua/eejet/article/view/5586

Downloads

Published

2020-08-31

How to Cite

Ivanenko, O., Gomelya, N., & Panov, Y. (2020). Evaluation of the influence of the catalysts application on the level of emissions of carbon monoxide in the manufacture of electrodes. Technology Audit and Production Reserves, 4(3(54), 4–11. https://doi.org/10.15587/2706-5448.2020.207483

Issue

Vol. 4 No. 3(54) (2020): Chemical engineering

Section

Ecology and Environmental Technology: Original Research

License

Copyright (c) 2020 Olena Ivanenko, Nikolai Gomelya, Yevgen Panov

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.