Optimization of amplitude-frequency characteristic of broadband voltage divider intended for measurement of power quality parameters
DOI:
https://doi.org/10.15587/2706-5448.2020.205132Keywords:
voltage divider, amplitude-frequency characteristic, electric power quality, high-voltage scale transducerAbstract
The object of research is the circuit diagram of a broadband capacitive-resistive voltage divider with a series-parallel connection of its resistive and capacitive components. For many years, the use of voltage dividers was limited to measuring various voltages in high-voltage laboratories. However, voltage dividers, compared to voltage transformers, are characterized by a wider bandwidth, therefore they began to be considered as one of the main means of measuring voltages in high-voltage electric networks. One of the catalysts for the implementation of this solution may be the intensive development of the Smart Grid concept, which requires new, more advanced means of monitoring the quality of electric power. Therefore, experimental and theoretical studies aimed at reducing the error of broadband voltage dividers are important.
The task of optimally adjusting the low voltage arm of the voltage divider is solved by using linear programming elements to study the systematic error function.
This article presents the results of the study of adjusting the amplitude-frequency characteristics of the voltage divider, which are aimed at reducing its error. For this purpose, a parameter for optimizing the capacitance value of low-voltage arm at which the absolute value of the positive and negative maximum of the systematic error of the capacitive-resistive voltage divider will be the same was found. The calculations are performed for different values of the division ratio of the voltage divider. The resulting data sets are generalized in the form of three-dimensional graphs.
The work contributes to the further development of the theory of high-voltage voltage dividers. As a result of the studies, the possibility of optimizing the amplitude-frequency characteristics of a broadband capacitive-resistive voltage divider by varying the capacitance value of its low-voltage arm is shown. The studies are relevant due to the fact that this category of high-voltage scale transducers has the potential to become mandatory for determining the quality of electric energy directly in high-voltage networks.
References
- Harada, T., Wakimoto, T., Sato, S., Saeki, M. (2000). Development of Japan's National Standard Class 500 kV Lightning Impulse Voltage Divider. 2000 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.00CH37077), 3, 1564–1568. doi: http://doi.org/10.1109/pesw.2000.847575
- Prochazka, R., Hlavacek, J., Knenicky, M., Mahmoud, R. (2016). Determination of Frequency Characteristics of High Voltage Dividers in Frequency Domain. 17th International Scientific Conference on Electric Power Engineering (EPE), 1–4. doi: http://doi.org/10.1109/epe.2016.7521821
- Muscas, C. (2010). Power quality monitoring in modern electric distribution systems. IEEE Instrumentation & Measurement Magazine, 13 (5), 19–27. doi: http://doi.org/10.1109/mim.2010.5585070
- Pawelek, R., Wasiak, I. (2014). Comparative measurements of voltage harmonics in transmission grid of 400 kV. 2014 16th International Conference on Harmonics and Quality of Power (ICHQP), 606–610. doi: http://doi.org/10.1109/ichqp.2014.6842763
- Blajszczak, G. (2011). Resistive Voltage Divider for Higher Harmonics Measurement in 400 kV Network. 11th International Conference on Electrical Power Quality and Utilisation, 1–4. doi: http://doi.org/10.1109/epqu.2011.6128953
- Anokhin, Y. L., Brzhezitsky, V. O., Haran, Y. O., Masliuchenko, I. M., Protsenko, O. P., Trotsenko, Y. O. (2017). Application of high voltage dividers for power quality indices measurement. Electrical Engineering & Electromechanics, 6, 53–59. doi: http://doi.org/10.20998/2074-272x.2017.6.08
- Trotsenko, Y., Brzhezitsky, V., Protsenko, O., Haran, Y., Chumack, V. (2018). Calculation of High Voltage Divider Accuracy Using Duhamel's Integral. 2018 IEEE 17th International Conference on Mathematical Methods in Electromagnetic Theory (MMET), 213–216. doi: http://doi.org/10.1109/mmet.2018.8460314
- Trotsenko, Y., Brzhezitsky, V., Protsenko, O., Haran, Y. (2019). Experimental Laboratory Equipped with Voltage Dividers for Power Quality Monitoring. 2019 IEEE International Conference on Modern Electrical and Energy Systems (MEES), 270–273. doi: http://doi.org/10.1109/mees.2019.8896471
- Brzhezytskyi, V. O., Isakova, A. V., Rudakov, V. V.; Brzhezytskyi V. O., Mykhailov, V. M. (Eds.) (2005). Tekhnika i elektrofizyka vysokykh napruh. Kharkiv: NTU "KhPI"-Tornado, 930.
- Makarov, E. G. (2005). Inzhenernye raschety v Mathcad. Saint Petersburg: Piter, 448.
- Gharavi, H., Ghafurian, R. (2011). Smart Grid: The Electric Energy System of the Future. Proceedings of the IEEE, 99 (6), 917–921. doi: http://doi.org/10.1109/jproc.2011.2124210
- Rahmatian, F. (2010). High-Voltage Current and Voltage Sensors for a Smarter Transmission Grid and Their Use in Live-Line Testing and Calibration. IEEE PES General Meeting, 1–3. doi: http://doi.org/10.1109/pes.2010.5590212
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Volodymyr Brzhezitsky, Yevgeniy Trotsenko, Yaroslav Haran
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
