Non-Stationary Vibratory Signatures Bearing Fault Detection Using Alternative Novel Kurtosis-based Statistical Analysis

  • Nur Adilla Kasim Department of Mechanical Engineering, Politeknik Mukah, Mukah, Malaysia
  • Mohd Ghafran Mohamed Department of Mechanical Engineering, Politeknik Mukah, Mukah, Malaysia
  • Mohd Zaki Nuawi Department of Mechanical and Material Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Malaysia
DOI: https://doi.org/10.33736/jaspe.4594.2022
Keywords: Rotating machinery, Vibration signal, Bearing fault, statistical analysis, Z-rotation method

Abstract

Vibration signature-based analysis to detect and diagnose is the commonly used technique in the monitoring of rotating machinery. Reliable features will determine the efficacy of diagnosis and prognosis results in the field of machine condition monitoring. This study intends to produce a reliable set of signal features through an alternative statistical characteristic before available relevant prediction methods. Given the above advantage of Kurtosis, a newly formed feature extraction analysis is adapted to extract a single coefficient out of EMD-based pre-processing vibration signal data for bearing fault detection monitoring. Each set of IMFs data is analyzed using the Z-rotation method to extract the data coefficient. Afterwards, the Z-rot coefficients, RZ are presented on the base of the specification of the defect vibratory signal to observe which IMF data set has the highest correlation over the specification given. Throughout the analysis studies, the RZ shows some significant non-linearity in the measured impact. For that reason, the Z-rotation method has effectively determined the strong correlation that existed in some of the IMFs components of the bearing fault. It corresponds to the first IMF for the inner race and the rolling ball specified a strong RZ coefficient with the highest correlation coefficient of R2 = 0.9653 (1750 rpm) and R2 = 0.9518 (1772 rpm), respectively. Whereas, the 4th IMF decomposition for the outer race bearing fault scored is R2 = 0.8865 (1772 rpm). Meanwhile, the average R-squared score in the correlation between RZ coefficient and bearing fault throughout the study is R2 = 0.8915. Thus, it can be utilized to be the alternative feature extraction findings for monitoring bearing conditions.

References

Fenineche, H., Felkaoui, A., & Rezig, A. (2019). Effect of input data on the neural networks performance applied in bearing fault diagnosis. Rotating Machinery and Signal Processing (pp. 34–43). Springer International Publishing. https://doi.org/10.1007/978-3-319-96181-1_3

Patil, M. S., Mathew, J., & RajendraKumar, P. K. (2007). Bearing signature analysis as a medium for fault detection: A review. Journal of Tribology, 130(1). https://doi.org/10.1115/1.2805445

Orhan, S., Aktürk, N., & Çelik, V. (2006). Vibration monitoring for defect diagnosis of rolling element bearings as a predictive maintenance tool: Comprehensive case studies. NDT & E International, 39(4), 293–298. https://doi.org/https://doi.org/10.1016/j.ndteint.2005.08.008

Williams, t., Ribadeneira, x., Billington, s., & Kurfess, t. (2001). Rolling element bearing diagnostics in run-to-failure lifetime testing. Mechanical Systems and Signal Processing, 15(5), 979–993. https://doi.org/https://doi.org/10.1006/mssp.2001.1418

Pham, D. T., & Oztemel, E. (1996). Condition monitoring and fault diagnosis. Intelligent Quality Systems (pp. 167–191). Springer London. https://doi.org/10.1007/978-1-4471-1498-7_8

Dyer, D., & Stewart, R. M. (1978). Detection of rolling element bearing damage by statistical vibration analysis. Journal of Mechanical Design, 100(2), 229–235. https://doi.org/10.1115/1.3453905

El-Thalji, I., & Jantunen, E. (2014). A descriptive model of wear evolution in rolling bearings. Engineering Failure Analysis, 45, 204–224. https://doi.org/10.1016/j.engfailanal.2014.06.004

Zhou, S., Xiao, M., Bartos, P., Filip, M., & Geng, G. (2020). Remaining useful life prediction and fault diagnosis of rolling bearings based on short-time fourier transform and convolutional neural network. Shock and Vibration, 2020, 8857307. https://doi.org/10.1155/2020/8857307

Su, Y.-T., & Lin, S.-J. (1992). On initial fault detection of a tapered roller bearing: Frequency domain analysis. Journal of Sound and Vibration, 155(1), 75–84. https://doi.org/https://doi.org/10.1016/0022-460X(92)90646-F

Kuo, R. ., & Cohen, P. . (1999). Multi-sensor integration for on-line tool wear estimation through radial basis function networks and fuzzy neural network. Neural Networks, 12(2), 355–370. https://doi.org/10.1016/S0893-6080(98)00137-3

Liu, J., Teng, G., & Hong, F. (2020). Human activity sensing with wireless signals: A survey. Sensors, 20(4). https://doi.org/10.3390/s20041210

Jia, F., Lei, Y., Lin, J., Zhou, X., & Lu, N. (2016). Deep neural networks: A promising tool for fault characteristic mining and intelligent diagnosis of rotating machinery with massive data. Mechanical Systems and Signal Processing, 72–73, 303–315. https://doi.org/10.1016/j.ymssp.2015.10.025

Zhang, X., Feng, N., Wang, Y., & Shen, Y. (2015). Acoustic emission detection of rail defect based on wavelet transform and Shannon entropy. Journal of Sound and Vibration, 339, 419–432. https://doi.org/https://doi.org/10.1016/j.jsv.2014.11.021

Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998). The empirical mode decomposition and the Hilbert Spectrum for nonlinear and non-stationary Time Series analysis. Proceedings: Mathematical, Physical and Engineering Sciences, 454(1971), 903–995. http://www.jstor.org/stable/53161

Krishnakumar, P., Rameshkumar, K., & Ramachandran, K. I. (2015). Tool Wear Condition prediction using vibration signals in high speed machining (HSM) of titanium (Ti-6Al-4V) alloy. Procedia Computer Science, 50, 270–275. https://doi.org/10.1016/j.procs.2015.04.049

Kasim, N. A., Nuawi, M., Ghani, J., Rizal, M., Ahmad, M. A. F., & Haron, C. (2019). Cutting tool wear progression index via signal element variance. Journal of Mechanical Engineering and Sciences, 13, 4596–4612. https://doi.org/10.15282/jmes.13.1.2019.17.0387_rfseq1

Abellan-Nebot, J. V., & Romero Subirón, F. (2010). A review of machining monitoring systems based on artificial intelligence process models. The International Journal of Advanced Manufacturing Technology, 47(1), 237–257. https://doi.org/10.1007/s00170-009-2191-8

Martin, H. R., & Honarvar, F. (1995). Application of statistical moments to bearing failure detection. Applied Acoustics, 44(1), 67–77. https://doi.org/https://doi.org/10.1016/0003-682X(94)P4420-B

Ait-Amir, B., Pougnet, P., & El Hami, A. (2015). 6 - Meta-Model Development. In A. El Hami & P. Pougnet (Eds.), Embedded Mechatronic Systems 2 (pp. 151–179). Elsevier. https://doi.org/https://doi.org/10.1016/B978-1-78548-014-0.50006-2

Nuawi, M. Z., Nor, M. J. M., Jamaludin, N., Abdullah, S., Lamin, F., & Nizwan, C. K. E. (2008). Development of integrated Kurtosis-based algorithm for Z-filter technique. Journal of Applied Sciences, 8(8), 1541–1547. https://doi.org/10.3923/jas.2008.1541.1547

Published
2022-04-30
How to Cite
Kasim, N. A., Mohamed, M. G., & Nuawi, M. Z. (2022). Non-Stationary Vibratory Signatures Bearing Fault Detection Using Alternative Novel Kurtosis-based Statistical Analysis. Journal of Applied Science & Process Engineering, 9(1), 1139-1148. https://doi.org/10.33736/jaspe.4594.2022
Issue
Vol 9 No 1 (2022): Journal of Applied Science & Process Engineering, Volume 9, Number 1, 2022
Section
Articles

Copyright (c) 2022 UNIMAS Publisher

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Copyright Transfer Statement for Journal

1) In signing this statement, the author(s) grant UNIMAS Publisher an exclusive license to publish their original research papers. The author(s) also grant UNIMAS Publisher permission to reproduce, recreate, translate, extract or summarize, and to distribute and display in any forms, formats, and media. The author(s) can reuse their papers in their future printed work without first requiring permission from UNIMAS Publisher, provided that the author(s) acknowledge and reference publication in the Journal.

2) For open access articles, the author(s) agree that their articles published under UNIMAS Publisher are distributed under the terms of the CC-BY-NC-SA (Creative Commons Attribution-Non Commercial-Share Alike 4.0 International License) which permits unrestricted use, distribution, and reproduction in any medium, for non-commercial purposes, provided the original work of the author(s) is properly cited.

3) For subscription articles, the author(s) agree that UNIMAS Publisher holds copyright, or an exclusive license to publish. Readers or users may view, download, print, and copy the content, for academic purposes, subject to the following conditions of use: (a) any reuse of materials is subject to permission from UNIMAS Publisher; (b) archived materials may only be used for academic research; (c) archived materials may not be used for commercial purposes, which include but not limited to monetary compensation by means of sale, resale, license, transfer of copyright, loan, etc.; and (d) archived materials may not be re-published in any part, either in print or online.

4) The author(s) is/are responsible to ensure his or her or their submitted work is original and does not infringe any existing copyright, trademark, patent, statutory right, or propriety right of others. Corresponding author(s) has (have) obtained permission from all co-authors prior to submission to the journal. Upon submission of the manuscript, the author(s) agree that no similar work has been or will be submitted or published elsewhere in any language. If submitted manuscript includes materials from others, the authors have obtained the permission from the copyright owners.

5) In signing this statement, the author(s) declare(s) that the researches in which they have conducted are in compliance with the current laws of the respective country and UNIMAS Journal Publication Ethics Policy. Any experimentation or research involving human or the use of animal samples must obtain approval from Human or Animal Ethics Committee in their respective institutions. The author(s) agree and understand that UNIMAS Publisher is not responsible for any compensational claims or failure caused by the author(s) in fulfilling the above-mentioned requirements. The author(s) must accept the responsibility for releasing their materials upon request by Chief Editor or UNIMAS Publisher.

6) The author(s) should have participated sufficiently in the work and ensured the appropriateness of the content of the article. The author(s) should also agree that he or she has no commercial attachments (e.g. patent or license arrangement, equity interest, consultancies, etc.) that might pose any conflict of interest with the submitted manuscript. The author(s) also agree to make any relevant materials and data available upon request by the editor or UNIMAS Publisher.

To download Copyright Transfer Statement for Journal, click here