ARTICLES

Filter  
Active filters 0
Remove
  

Refine your searches by:

Collections
Technology
Environment
Pure sciences
Research
Biology
Education
Public health
Chemistry
Social Sciences
Agronomy and forestry
all records (75)

Languages
English
Spanish
Portuguese
German
French

Countries
Indonesia
Brazil
USA
Ukraine
Colombia
Spain
Mexico
Switzerland
Italy
Chile
all records (81)

Years
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
all records (24)

Filter  
 
31.860  Articles
1 of 3.186 pages  |  10  records  |  more records»
Tungsten Inert Gas (TIG) welding is a process which is used in those applications requiring a high degree of quality and accuracy. However, this welding process has disadvantage of less productivity. To overcome this disadvantage, Activated Tungsten Inert... see more

Dalam penelitian ini telah dikembangkan sistem pengelasan otomatis Tungsten Inert Gas (TIG) dengan menggunakan sensor vision pada pengelasan pipa aluminum. Penelitian ini mempelajari proses pengelasan cerdas pipa paduan aluminum 6063S-T5 dalam posisi teta... see more

The aim of this study was to develop a composite coating on 304 stainless steel employing a TIG (tungsten inert gas) process. Ti wire cored with graphite powder was used as the means of coating material. The process parameters were controlled to develop a... see more

Laser-TIG (tungsten inert gas) hybrid welding process is applied to produce stable back beads in the first layer during one-side multilayer welding. To explain why stable back beads can be formed, a comparison is conducted between single TIG and laser-TIG... see more

Due to its properties such as high strength/weight ratio, enhanced corrosion resistance, low density, AA6061-T6 aluminum alloy welding is widely used in structural, automotive and rail industry. In this study, AA6061-T6 alloy was welded with robotic metal... see more

The purpose of this study is to show the hardness of the GTAW welding results on SS 316L metal with surface heating during the welding process. Observations in this study used SS 316L material with heat temperature regulation on the metal surface of the w... see more

This paper reports on process parameter selection for optimizing the weld pool geometry in the metal inert gas welding of High strength low alloy (HSLA) steel. The experimental studies were conducted under varying Voltage, flow rate, stick out and wire fe... see more

Tungsten Inert Gas welding is a fusion welding process having very wide industrial applicability. In the present study, an attempt has been made to optimize the input process variables (electrode diameter, shielding gas, gas flow rate, welding current and... see more

The purpose of the present study was to evaluate the flexural strength of specimens made of nickel-chromium (Ni-Cr) and cobalt-chromium (Co-Cr) alloys and joined by tungsten inert gas (TIG) welding and conventional brazing. Ni–Cr and Co–Cr base metal spec... see more

1 of 3.186 pages  |  10  records  |  more records»