ARTICLES

Filter  
Active filters 0
Remove
  

Refine your searches by:

Collections
Agronomy and forestry
Technology
Chemistry
Mechanical Engineering
Biology
Research
Food and nutrition
Pure sciences
Environment
Education
all records (71)

Languages
English
Spanish
Portuguese
German
French

Countries
Indonesia
USA
Brazil
Ukraine
Romania
Switzerland
South Africa
Lithuania
Spain
India
all records (74)

Years
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
all records (24)

Filter  
 
5.880  Articles
1 of 588 pages  |  10  records  |  more records»
The coating of nicotinic acid (NA), sodium fluoride (SF) and sodium fluoric - nicotinic acid (SF-NA) deposited from a sodium fluoric solution with subsequent treatment in nicotinic acid on magnesium alloy AZ31 has been investigated. The corrosio... see more

Ultraviolet light emitting diodes (UV-LEDs) have attracted great interest in recent years. They can be used to polymerize coatings, such as those used for prefinished wood flooring. In this project, two lamps were compared for their suitability to be used... see more

Automotive conversion coatings consist of layers of materials that are chemically applied to the body structures of vehicles before painting to improve corrosion protection and paint adhesion. These coatings are a consequence of surface-based chemical rea... see more

A study was conducted to examine methods of adjusting cerium-lithium sealing process parameters in order to improve the corrosion protection capabilities of a cobalt-based chemical conversion film. In order to seal the pores of the cobalt-based conversion... see more

In this research, the regeneration cycle of cobalt chemical conversion waste liquid, the effects of oxidizing agents on solution service life, and the influence of oxidizing agents on the treatment of waste liquid was studied by the electrochemical perfor... see more

Appropriate chemical composition of some magnesium alloys allows their application in biomedical field. However, the high reactivity of magnesium is a limiting factor for magnesium based material application due to the low corrosion resistance. Fluoride c... see more

Research on corrosion protection of aluminum has intensified over the past decades due to environmental concerns regarding chromate-based conversion coatings and also the higher material performance requirements in automotive and aviation industries. Phos... see more

The influence of electrolysis conditions at different electrolyte compositions on the phase formation and properties of coatings obtained by microarc oxidation (MAO) on an aluminum alloy AMg6 was studied. For electrolysis, three types of electrolytes were... see more

Linseed oil undergoes an oxidative drying reaction upon exposure to air, resulting in a soft film. The reaction conversion after 48 h reached 88% and 59% when it reacted at room temperature and −20 °C, respectively. Linseed-oil-loaded microcapsu... see more

1 of 588 pages  |  10  records  |  more records»