Journal title
Materials Science

   
ARTICLE
TITLE

The Properties of Water Born Thermoplastic Adhesive for Hot Stamping Multilayer Films Pranas NARMONTAS1,2, Egle FATARAITE1,2

SUMMARY

No disponible

PAGES
pp. 321 - 325

 Articles related

Subramani SHANMUGAN, Devarajan MUTHARASU    

Thin film based gas sensor is an advanced application of thin film especially Ga2O3 (GO) thin film gas sensor is useful for high temperature gas sensor. The effect of moisture or environment on thin film properties has more influence on gas sensing prope... see more


Emrah PESMAN, Mursit TUFAN    

In this study some physical, mechanical and thermal characteristics of high density polyethylene (HDPE) and CaCO3 coated/pigmented wood free paper fiber composites were investigated. The fillers used in this study were uncoated cellulose, 5.8 %, 11.... see more


Virginija JANKAUSKAITE, Ada GULBINIENE, Indira JIYEMBETOVA, Justa ŠIRVAITYTE, Virginijus URBELIS, Kazys Vytautas MICKUS    

Unfinished leather has high water vapour permeability and low waterproofness because of its natural porous structure. To modify the surface appearance and hide any defects, to improve physical properties, such as light and rub fastness, resistance to wat... see more


Virginija JANKAUSKAITE, Indira JIYEMBETOVA, Ada GULBINIENE, Justa ŠIRVAITYTE, Kestutis BELEŠKA, Virginijus URBELIS    

For military leather processing pinnacle technologies are applied, because the leather must have extreme hydrophobicity, herewith to maintain the breathability and moisture management capabilities. Therefore, leather producers must use such tanning chemi... see more


Wasan I. Khalil, Thaer A. Al-Daebal    

The present study covers the use of different percentages (25, 50, 75 and 100%) of clay bricks waste as replacement by volume of coarse natural aggregates to produce sustainable self-compacted concrete (SCC). All mixes used containing 10% silica fume as ... see more